answersLogoWhite

0

you need to figure out how much water per minute you need and get the minimum pipe diameter that will give you that. the bigger they are the more expensive they are, on a logaritmic scale.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What is the relationship between pressure and diameter in a pipe system?

In a pipe system, there is an inverse relationship between pressure and diameter. This means that as the diameter of the pipe increases, the pressure within the pipe decreases, and vice versa.


What is the recommended diameter for a 4 inch vent pipe in a residential plumbing system?

The recommended diameter for a 4-inch vent pipe in a residential plumbing system is typically 2 inches.


What is the recommended diameter for a 2 inch drain pipe in a residential plumbing system?

The recommended diameter for a 2-inch drain pipe in a residential plumbing system is typically 2 inches.


What is the recommended diameter for a 4 inch drain pipe in a residential plumbing system?

The recommended diameter for a 4 inch drain pipe in a residential plumbing system is typically 4 inches.


Which size of sprinkler pipe, 3/4 inch or 1 inch, should I use for my irrigation system?

The size of sprinkler pipe you should use for your irrigation system depends on the water flow and pressure needed. Generally, a 1-inch pipe is recommended for larger systems or areas with high water demand, while a 3/4-inch pipe is suitable for smaller systems or areas with lower water demand. It is important to consider factors such as water pressure, flow rate, and the number of sprinkler heads when choosing the pipe size for your irrigation system.


What is the diameter of a pipe?

The diameter of a pipe is its width across an open end of the pipe. The inside diameter is the width measuring on the inside of the pipe; the outside diameter is the width measuring on the outside.______________________________________________________________________________________________________For a pipe of circular cross section, its nominal diameter is the diameter of the cross section.The inner diameter is the measuring on the inside of the pipeThe outside diameter is the measuring on the outside of the pipe.


How to connect 1/4 irrigation tubing to PVC pipe?

To connect 1/4 inch irrigation tubing to PVC pipe, you can use a barbed fitting. Simply insert the barbed end of the fitting into the tubing and then connect the other end to the PVC pipe using a PVC cement or a threaded adapter. This will create a secure connection for your irrigation system.


What is the relationship between pipe diameter, pressure, and flow in a fluid system?

In a fluid system, the relationship between pipe diameter, pressure, and flow is governed by the principles of fluid dynamics. A larger pipe diameter allows for higher flow rates at lower pressures, while a smaller diameter results in higher pressures needed to achieve the same flow rate. This is known as the relationship between pressure drop and flow rate in a fluid system.


How can I fix an irrigation pipe leak?

To fix an irrigation pipe leak, first turn off the water supply to the system. Locate the leak and clean the area around it. Use a pipe cutter to remove the damaged section of the pipe. Cut a new piece of pipe to fit the gap and secure it in place with couplings and pipe glue. Turn the water supply back on and check for any additional leaks.


Does stepping down the size of pipe on irrigation bring up the pressure?

Stepping down the size of a pipe on irrigation can certainly bring up the pressure. Generally, the larger the pipe, the lower the pressure. It is best to use at least a 3/4" pipe in size in terms of irrigation.


What is difference between nominal diameter of a pipe and bore of pipe and also defined the nominal diameter of pipe and tube how you differentiate both?

bore of the pipe is the internal diameter of pipe but the nominal diameter of pipe is the dia of a circle which is draw through a point which is situates at exactly half of the thickness of pipe or we can say that (outer dia of pipe- thickness of pipe )=nominal bore of pipe.


How can I effectively create a DIY irrigation system using PVC pipe with holes?

To create a DIY irrigation system using PVC pipe with holes, you can follow these steps: Cut the PVC pipe to the desired length for your garden or plant beds. Drill small holes along the length of the pipe using a drill bit. Connect one end of the pipe to a water source, such as a hose or a water tank. Lay the pipe along the plants or garden beds, ensuring that the holes are facing towards the plants. Turn on the water source to allow water to flow through the pipe and irrigate the plants through the holes. This DIY irrigation system can help efficiently water your plants and garden beds.