Oh, dude, it's like super simple. So, the diameter of a circle is just the distance across it, right? And the width is just the distance from one side to the other. So, to convert diameter into width, you just divide the diameter by pi. Easy peasy!
Chat with our AI personalities
Well, darling, to convert diameter into width, you simply divide the diameter by 2. The width is just half of the diameter, so it's as easy as slicing a pie. Just remember, math is your friend, so don't overcomplicate things.
To convert diameter into width, you need to divide the diameter by the mathematical constant pi (π), which is approximately 3.14159. The formula to convert diameter to width is: width = diameter / π. For example, if the diameter of a circle is 10 units, the width would be 10 / 3.14159 ≈ 3.183 units.
Well, isn't that a happy little question! To convert diameter into width, you simply need to divide the diameter by 2. You see, the diameter is the distance across a circle through its center, while the width is the distance from side to side. Just remember, there are no mistakes, only happy little accidents in math!
The diameter of a circle is the width of the circle. The measurement in a straight line from edge to opposite edge passing through the centre.
Diameter is the width of a circular or spherical figure or object. Something 180 inches in diameter is also 180 inches in width or thickness.
The diameter of a pipe is its width across an open end of the pipe. The inside diameter is the width measuring on the inside of the pipe; the outside diameter is the width measuring on the outside.______________________________________________________________________________________________________For a pipe of circular cross section, its nominal diameter is the diameter of the cross section.The inner diameter is the measuring on the inside of the pipeThe outside diameter is the measuring on the outside of the pipe.
Subtract the square of the width from the diameter. The square root of that is the length.
A US dime's width or diameter is 0.705 inch.
c=diameter a=lenght b=width c=sqrt(a^2 + b^2) ---- or in words, the diameter equals the square root of length squared plus width squares, that's the Pythagorean Theorem.