You need to know the density of the aggregate. Typically that will be in Imperial system (pounds per cubic feet) or in SI system (kilograms per cubic metre).
Use Volume = Mass/Density to convert to volume in the same system.
Then convert from SI to Imperial (or reverse) using
1 cubic metre = 35.315 cu ft or
1 cu ft = 0.02832 cubic metre.
Wiki User
∙ 11y agoMultiply cu m by 1,000,000 to convert to cu cm. 1 cu m = 1 m * 1 m * 1m = 100 cm * 100 cm * 100 cm = 1000000 cu cm
If you meant cu. in to cu. ft.divide by 1728.
To convert liters to cu in you have to multiply by 61.08. So,3.8 x 61.02 =231.876 cu in
Inches is a unit of LENGTH. Cubic feet is a unit of VOLUME. Because the units are incompatible, you cannot convert one into another. BUT if the problem is to convert 36 CUBIC inches into cubic feet, then the units are compatible because cubic inches IS a unit of volume. To compute the conversion ratio, first compute the number of cubic inches in a cubic foot: a cubic foot is equivalent to the volume of a cube with all sides equal to 12". The volume then is 12" X 12" X 12" = 1728 cu. in. Therefore to convert from cubic inches to cubic feet, divide the cubic inches by 1728. So to convert 36 cu. in. to cu. ft. take 36 divided by 1728 = 0.0208 cu. ft. Hope this helps! Mathaman
Use this formula:cubic feet x 6.23 = Imperial gallons
To determine the number of grams of Cu(NO3)2 produced, you need to consider the molar ratio between Cu(NO3)2 and Cu. Firstly, convert the 4.2 grams of Cu to moles using the molar mass of Cu. Then, use the balanced chemical equation to find the moles of Cu(NO3)2 produced. Finally, convert the moles of Cu(NO3)2 to grams using its molar mass.
The balanced equation for the reaction is: Cu + 2AgNO3 -> Cu(NO3)2 + 2Ag Calculate the molar mass of Cu and Ag (Cu = 63.55 g/mol, Ag = 107.87 g/mol). Using the molar ratio of Cu to Ag (1:2), convert the mass of Cu to moles, then use the molar ratio to find the moles of Ag produced. Finally, convert moles of Ag to grams using the molar mass of Ag to find the grams of silver produced.
There are 1728 cubic inches in 1 cubic foot. To convert cu ft to cu in, multiply cu ft by 1728 (cu in per co ft).1,728 cubic inches per cubic foot.
Multiply cu m by 1,000,000 to convert to cu cm. 1 cu m = 1 m * 1 m * 1m = 100 cm * 100 cm * 100 cm = 1000000 cu cm
Ok - some facts, a/ About 105lbs of aggregate per cu foot. b/ 27 cu feet per yard c/ 1 cu yard is 0.765 cubic meters d/ 1 ton is 2000lbs (as compared to a metric TONNE - which is about 2200) Therefore... 105 x 27 = 2835 lbs of aggregate per cu.y 2835/0.765 = 3705lbs of aggregate per cu.m 3705/2000 = 1.85 Ton/cu.meter
1 ft3 = 0.02832 m3
If you meant cu. in to cu. ft.divide by 1728.
You need to calculate the total volume of the space that the concrete has to fill. if you're doing a slab 4" thick a cu. yd. will cover 81 sq. ft. Take the total area and divide by 81 to get the number of yard needed.
To convert liters to cu in you have to multiply by 61.08. So,3.8 x 61.02 =231.876 cu in
what is the math to convert gallons to cu inches
lets convert one unit to another . we can convert mm to m .lets know the convesrion factor .1 cu m=1000 cu mm.
The copper-to-sulfate ratio in copper(I) sulfate (Cu2SO4) is 2:1. This means that for every 2 atoms of copper, there is 1 sulfate ion present in the compound.