Dilute it with water until the volume is 5 times the original volume
volume = mass / volume volume = 100 / 20 volume = 5
20*20*20=8000
The only way to make a 20 volume would be to mix equal parts of 30 and 10 volumes.
You calculate 0.05 percent of the volume of the base liquid, then add that amount of whatever you want to dilute in this quantity.
Yes, you can dilute 40 volume peroxide by mixing equal parts of 40 volume peroxide and water to achieve a 20 volume solution. For example, mix 1 part 40 volume peroxide with 1 part water to create a 20 volume peroxide solution.
To dilute 20 volume developer to 10 volume, mix equal parts of 20 volume developer and a neutral liquid, such as distilled water or a low-volume developer. This will reduce the concentration of the developer and create a 10 volume solution for gentler hair processing. It's important to measure accurately to ensure the desired volume is achieved.
Dissolve 20g of NaOH in about 500 mL of water and dilute with water to 1000mL. Mix well.
It must be distilled water but yes. You can combine equal parts distilled water and 40 volume to get 20 volume developer.
To dilute 20 volume hydrogen peroxide to make a 3% solution, mix 1 part of 20 volume hydrogen peroxide with about 6 parts water. This will result in a 3% concentration of hydrogen peroxide. Remember to handle hydrogen peroxide carefully and wear appropriate protective gear.
Yes, you can dilute 30 volume peroxide to 20 volume by mixing 2 parts of the 30 volume solution with 1 part of distilled water. This will reduce the concentration of the peroxide while maintaining the desired volume strength. Be sure to mix well before use.
To dilute a 100 mM solution to 5 mM, you would need to dilute it by a factor of 20. To do this, you can add 19 parts of a suitable solvent (such as water) to 1 part of the 100 mM solution. Mix thoroughly to ensure a homogeneous 5 mM solution.
Dilute solution contain small amounts of solute for a certain volume of solvent.
To make 10 volume developer from 20 volume developer, you can mix equal parts of 20 volume developer and distilled water. For example, mix 1 part of 20 volume developer with 1 part distilled water to create 10 volume developer.
It is not recommended to dilute hair developer by adding water as it can alter the effectiveness of the product. It's best to use the developer at its intended volume for optimal results.
Dilute it with water until the volume is 5 times the original volume
To dilute 31.45% hydrochloric acid to a 20% solution, you can mix a calculated amount of the 31.45% hydrochloric acid with water. Using the formula C1V1 = C2V2, where C1 is the initial concentration, V1 is the volume of the initial solution, C2 is the desired concentration, and V2 is the final volume, you can determine the volume of the 31.45% acid needed to achieve a 20% solution when mixed with water.