0
5/16 hole X 4 inch on a flat bottom hole: This will depend on the material, and tools available. Use a 1/8 bit, then 5/16. If you are not sure how deep the drill bit is in the hole, paint white out on the bit as your 4 inch mark so you can see it while the drill is spinning. If the material is metal, you will need coolant.
To get the flat bottom: it wood, put a flat ended bolt into the hole and hammer, it will flatten the hole, it metal, forget about it, the hole is quite flat, and a pain in the butt to change. :-)
What else can I help you with?
What is one sixteenth plus five sixteenth?
One of anything plus five of the same thing is equal to six of them.
What is five sixteenth as a percentage?
%31.25
What is three sixteenth plus five eighths?
thirteen sixteenth 5/8 = 10/16 3/16 + 10/16 = 13/16
What is one quarter plus one sixteenth?
One quarter (1/4) is equivalent to 4/16 when expressed with a common denominator of 16. Adding one sixteenth (1/16) to this gives you 4/16 + 1/16 = 5/16. Therefore, one quarter plus one sixteenth equals five sixteenths (5/16).
What does five twelves minus one sixteenth equal?
.3541666..7 -or- 1/2, I THINK what i did to get the 1/2 is i took 5/12 and added 4 to the top and bottom to make the denominators the same and so then it was 9/16-1/16 and subtracted the tops to get 8/16 and simplified it to get 1/2. i don't remember if that's right, but the decimal one is for sure!
What size drill do you use for a five sixteenth inch dia lag screw?
It depends on the material you are fitting it into. In most wood I pre-drill a 1/4 hole for this. In softer woods i would drill a smaller hole .
What is five sixteenth as a fraction?
five sixteenth is written as 5/16. This already is a fraction.
What is one sixteenth plus five sixteenth?
One of anything plus five of the same thing is equal to six of them.
What is the LCD of five-sixth and five-sixteenth?
48
What is five sixteenth as a percentage?
%31.25
Convert five sixteenth to decimal?
0.3125.
What is five sixteenth of forty eight?
15
Is mostly closely related to the theme of economics?
five power treaty
What is 6 and one sixth minus 5 and 3 fourths?
Five sixteenth
How many consonants are in the famous school phrase fire drill?
There are five consonants in the phrase "fire drill."
What is a tool for a boring holes with five letters?
How about bit (as in drill bit) or possibly awl.
How durable is this drill?
An average electric drill will last for about five to ten years, allowing for standard wear and tear and assuming typical usage.
