Want this question answered?
Multiply by 144
To find the sq. ft of a roof you have to measure the length and the width and multiply those figures together. Then you divide that figure by 100 and it will tell you how many squares of shingles it will take to cover it.
Multiply the length times the width.
The area is 8*6 = 48 square feet
The square footage of your house is not the same as the square footage of your roof if there is any pitch. If you are asking aboutasphalt shingles, generally each bundle covers 33.3 square feet. Therefore find the square footage of your roof, divide it by 33.3 to find the number of bundles, then multiply the original square footage by 5-10% to get the number of additional bundles for cutoffs and starter strip. The variation in percentage accounts for the number and length of valleys of the roof. Example:[@5%]roof =1500 ft2 --> (1500/33.3=45.05) (1500x.05=75 -->75/33.3=2.25)45.05 + 2.25= (48) bundles
measure the square footage first. one square of shingles (3 bundles) covers 100 sqft. divide the square footage by 100 and that's how many squares of shingles you need (be sure to buy enough extra to cap the roof with and compensate for waste at the ends. (starter and ender shingles)
There are 3 bundles of shingles in every square. A square is 100 square feet. In 23 bundles, you would have 766 square feet approximately
That really depends on several different variables including the square footage of the roof itself and the size / type of the tiles being used. Most of the time when buying roofing tiles / shingles it will state on the packaging how many square's it will cover. It should also state the "square footage" covered as well. So once you have your square footage you can then figure out how many tiles / shingles it will take to cover your roof. Don't forget to add 10 to 15% for waste in your calculations.
Multiply by 144
To figure out the square footage of this odd sized room, you simply need to multiply the numbers. The answer is 2720 square feet.
It weighs 3 Ibs per one square footage of asphalt shingle
To find the sq. ft of a roof you have to measure the length and the width and multiply those figures together. Then you divide that figure by 100 and it will tell you how many squares of shingles it will take to cover it.
For a parking lot to have 3 measurements, it must be an unusual shape. We would need more information to figure the square footage.
I use algebra to figure square footage, cubic footage, and angles when building, It is very important.
Multiply the length times the width.
if you know the footage say its 15 feet wide and 19 long than you just multiply it and thats the SQUARE FOOTAGE of the area so that
The area is 8*6 = 48 square feet