You measure the length, L, in some units (inches, centimetres, whatever), measure the width, W, in the same units and then calculate L/W.
Divide the width by the length when both are measured in the same units.
You find the ration by creating a fraction from the fators and then reducing the fraction to the lowest common denominator. The resulting reduced fraction is the ratio. For Example. A length of 10 feet and a width of 5 feet 10/5 reduces to 2/1 so 2:1 is the ratio of length to width
The ratio of width to length is 34, so W = 34*L The area of a rectangle is L * W, so using the ratio we get L * 34*L = 108 cm2 34*L2 = 108 L = SQRT (108/34) = 1.78 cm W = 60.6 cm
If Length * Width = Area, then Area ÷ width = Length
Each face of a box is a rectangle . The area of a rectangle is (its length) times (its width). Measure the length and width of each face, and multiply (length times width). If you think about what you're doing, and plan it carefully, you only have to make three measurements and you'll have the whole box covered ... all six faces.
Divide the width by the length: width -------- height
Divide the width by the length when both are measured in the same units.
1+ square root of 5 over 2 not positive
You find the ration by creating a fraction from the fators and then reducing the fraction to the lowest common denominator. The resulting reduced fraction is the ratio. For Example. A length of 10 feet and a width of 5 feet 10/5 reduces to 2/1 so 2:1 is the ratio of length to width
The ratio of width to length is 34, so W = 34*L The area of a rectangle is L * W, so using the ratio we get L * 34*L = 108 cm2 34*L2 = 108 L = SQRT (108/34) = 1.78 cm W = 60.6 cm
you find the length and width by counting the numbers on the side to find the width and counting the numbers going across to find the length
Find the width, and multiply the length and the width.
If Length * Width = Area, then Area ÷ width = Length
It is length•2+width•2 So if you have the length u can find the width
Each face of a box is a rectangle . The area of a rectangle is (its length) times (its width). Measure the length and width of each face, and multiply (length times width). If you think about what you're doing, and plan it carefully, you only have to make three measurements and you'll have the whole box covered ... all six faces.
Assuming that this is a rectangular prism, you just multiply length times width.
If you are trying to find the ratio of the lengths of two similar rectangles, divide the length of one side of one rectangle by the corresponding side length of the other rectangle. To find the ratio between their volumes, divide the volume of one rectangle by the volume the other rectangle. To find volume, multiply the width of the rectangle by the length of the rectangle.