It is not possible.
The math is such that a long skinny site has a long circumference and little area and a short wide one has a short circumference and a lot of area. The circumference is not enough information.
If you give the length of each straight side and specify at least two of the corner angles than it is possible to calculate the area.
Give each corner a letter - A, B, C, D etc.
Submit something like this:
Side A-B 60 feet
Angle B 90 degrees
Side B-C 30 feet
Angle C 90 degrees
Side C-D 50 feet
Side D-A 28 feet
Alternatively, if you don't know the angles, give one of the diagonal measurements.
Side A-B 60 metres
Side B-C 30 metres
Side C-D 50 metres
Side D-A 28 metres
Diagonal A-C 52 metres
* obviously the US and UK use feet and the rest of the world uses metres. Use whatever units you are comfortable with.
Part of the circumference of a circle is an arc.
Circumference = 2*pi*radius or diameter*pi
The circumference of a standard U.S. 50 cent piece, also known as a half dollar, is approximately 11.34 centimeters (or about 4.5 inches). The coin has a diameter of 3.1 centimeters (1.2 inches), and the circumference can be calculated using the formula (C = \pi \times d), where (d) is the diameter.
You could use a pair of calipers. Alternatively, measure its circumference using a piece of string and divide the measure by pi.
210 sq ft. Typically carpet comes in 12' and 15' widths. If you get a 15' wide piece, you would want it to be 15' long (1 extra foot to trim off). If you get a 12' wide piece, you will need to seam a section along one side. With a 12' piece you would need 20'. This would put your seam in in 3 pieces.
Part of the circumference of a circle is an arc.
It's called a Plain.
Circumference = 2*pi*radius or diameter*pi
Lay out or stand up the piece you're interested in. -- Take out your tape and your calculator. -- Measure the length of the piece, in inches. -- Then measure the width of the piece, in inches. -- Multiply the two numbers. -- Divide the product by 144. The result is now the square footage of the piece or area you measured
why could you not o this ur self
Width times length for square cornered lots.
A cup is usually a roughly cylindrical hollow container. The circumference of a cup would be the length of a piece of string wrapped around the cylinder.
The circumference of a standard U.S. 50 cent piece, also known as a half dollar, is approximately 11.34 centimeters (or about 4.5 inches). The coin has a diameter of 3.1 centimeters (1.2 inches), and the circumference can be calculated using the formula (C = \pi \times d), where (d) is the diameter.
Discuss (frisby thing) . MistroJoe
The circumference is the length of the outside of the circle. For example, if you took a piece of string and made a circle with it, then laid the string straight, the length of the string would be the circumference. The circumference of a circle can be measured by doing two times the radius of the circle times the mathematical constant, pi.
A piece of the circumference of a circle is called an arc A piece of the area of a circle bounded by an arc and two radii is called A sector. A piece of the area of a circle bounded by an arc and a chord is called a segment
45 inches are 114.3 centimeters or 1.143 meters. Scroll down to related links and look at "Comparison of centimeters and inches".