Wiki User
∙ 15y agoOutput equals efficiency times input; in formula, Ot = Ef x In and so In = Ot/Ef. To calculate the original input, divide the output by the efficiency.
Wiki User
∙ 15y agoIf a machine has 100 percent efficiency, the output work = the input work. That's actually basically what the efficiency of a machine is - output work / input work * 100.
B. Efficiency
Mechanical efficiency = (output energy)/(input energy) . It's typically stated as a percentage.
Efficiency as a percent is output/input * 100%12000/15000 * 100% = 80% efficiency which makes sense, because it takes more work (input) than it give out (output). So the efficiency should be less than 100%.
Efficiency = Output value / Input valueFor example, if a machine needs 10 KW to run and produces 8 KW, its power efficiency is 8/10 = 0.8 or 80%Efficiency is always between 0 and 1 (or 0 and 100 if expressed as a percentage.)
Efficiency is typically calculated as the ratio of actual output to maximum possible output, expressed as a percentage. The formula for efficiency is: Efficiency = (Actual output / Maximum possible output) * 100%.
The formula for the percent efficiency of a pulley is (output work/input work) x 100%. It compares the output work (work done by the pulley) to the input work (work done on the pulley) to determine how efficient the pulley system is in transferring energy.
The formula to find the work output of efficiency is: Work output = Efficiency x Input work. Efficiency is a ratio of output work to input work, so multiplying this ratio by the input work gives the work output.
Light water nuclear plants like PWR and BWR have efficiency of about 33 percent, that is the ratio of electric output to reactor thermal output. Gas cooled reactors can be up to 40 percent as they work at higher temperature.
Output/Input * 100= %
Efficiency = (output power/input power) x 100%
The formula for percent work efficiency is: percent efficiency = (work output/work input) x 100 To find the answer to this question, you just need to plug the given values into the formula. The problem tells you that the work input is 240 J and the percent efficiency is 75 %, so 75 = (work output/240) x 100 Now, solve for work output: -first divide by 100 .75 = (work output/240) -then multiply by 240 180 J = work output (in units of joules because work is measured in joules) And there's your answer. Hope this helped!
If a machine has 100 percent efficiency, the output work = the input work. That's actually basically what the efficiency of a machine is - output work / input work * 100.
Efficiency % = (Output/Input) x 100
The efficiency of a lever can be calculated using the formula: Efficiency = (output force × output distance) / (input force × input distance) * 100%. It represents the ratio of the output work done by the lever compared to the input work applied to the lever.
You can find the output force by dividing the work done by the input force by the efficiency. This formula is: Output Force = Work / (Input Force * Efficiency).
General formula for calculating efficiency is given by Efficiency = (output / input) * 100 It is denoted by greek letter Eta Efficiency cannot be more than 100%.