0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do I find the volume of an irregular object using a graduated cylinder?
To determine the volume of an irregular object using graduated cylinders, you fill a graduated cylinder with water right to the top, then submerge the object in the water. Measure the water that overflows using a second graduated cylinder, and read the water level in it in cc's or cubic inches. That is the object's volume.
How is liquid volume measured?
Liquid Volume Measuring Devices: The Graduated Cylinder and Buret Like weighing, measuring liquid volume is a fundamental and frequently encountered lab task. However, liquid volume is frequently measured using either a graduated cylinder or a buret. As the name implies, a graduated cylinder is a cylindrical glass (or plastic) tube sealed at one end with a calibrated scale etched (or marked) on the outside wall. Graduated cylinders come in a range of sizes (volume capacities), and much like a measuring cup, volume is measured by adding liquid to the cylinder and comparing the liquid level to the graduated scale. The measured volume corresponds to the volume of liquid contained in the cylinder. Hence, the graduated cylinder and devices like it (volumetric flasks, Erlenmeyer flasks, and beakers) are classified as to-contain (TC) devices. The volume of liquid in the graduated cylinder is obtained directly by reading the calibrated scale. In most situations, the liquid will be water or an aqueous solution.The liquid surface is curved (U-shaped) rather than horizontal due to the relatively strong attractive force between water and glass. (The curved surface is called the meniscus.) As a general rule, the bottom of the meniscus is taken as the liquid level in the cylinder (and any other volume measuring device). The scale divisions on a graduated cylinder are generally determined by its size. For example, the 50-mL graduated cylinder is divided into 1 mL increments. However, the scale of a 10-mL graduated cylinder is divided into 0.1 mL increments, and the scale of a 500-mL graduated cylinder is divided into 5 mL increments.The graduated cylinder scale is a ruled scale, and it is read like a ruler. The scale is read to one digit beyond the smallest scale division by estimating (interpolating) between these divisions. With a 50-mL graduated cylinder, read (and record) the volume to the nearest 0.1 mL. The 10-mL graduated cylinder scale is read to the nearest 0.01 mL and the 500-mL graduated cylinder scale is read to the nearest milliliter (1 mL).A buret is a scaled cylindrical tube attached to a stopcock (valve). A buret is designed to dispense or transfer a precisely measured volume of liquid to another container. The volume of liquid dispensed is determined by reading and recording the buret scale which corresponds to the liquid level in the buret before any liquid is transferred, Vinitial (or Vi),and after the transfer is complete, Vfinal (or Vf). The volume of liquid transferred is obtained by difference (Vf - Vi) and it is sometimes designated as Vt.Burets are available in a limited range of sizes; the most common size is 50-mL. The scale of a 50-mL buret is divided into 0.1 mL increments. Therefore, when the liquid level in a buret is read, it is read (and recorded) to the nearest 0.01 mL. Water or aqueous solutions are the most common liquids used with a buret, and like the graduated cylinder the bottom of the meniscus is taken as the liquid lever. The buret and devices like it (pipet and syringe) is classified as a to-deliver (TD) devices.
How do you find the volume of an object using the graduated cylinder?
By pouring a set amount of water into the cylinder then addin the object and seeing how much the volume changes. The amount of change is the volume of the object.
What do you call the procedure that helps you find the volume of an irregularly shaped object using a graduated cylinder?
It is the displacement method.
What would you use to measure using a graduated cylinder?
You would measure liquids with a graduated cylinder.You would measure liquids with a graduated cylinder.
What would you measure using a graduated cylinder?
The volume of a liquid.
What is the first thing you have to determine when using a graduated cylinder?
The first thing you have to determine when using a graduated cylinder is the volume of liquid it can hold and the smallest volume increment it can measure. This helps ensure that you are using the appropriate graduated cylinder for your measurements and that you are able to read the volume accurately.
What is a sentence with graduated cylinder?
The scientist carefully measured the volume of the liquid using a graduated cylinder.
Why use a graduated cylinder for 100ml of liquid?
A graduated cylinder is used for measuring liquid volumes accurately. By using a graduated cylinder, you can precisely measure out 100ml of liquid ensuring the correct volume is dispensed. The markings on the cylinder allow for easy reading and accurate measurement.
How can you find the density of a liquid using a graduated cylinder?
Density of an object is defined as mass per unit volume. Density - mass/volume (m/v) To find the density of a liquid using a graduated cylinder, you first of all take a measurement of the mass of the empty graduated cylinder (m1) and write it down. Lets say the mass is 0.5 kg (500 grams) Then fill the cylinder with the liquid that you want to find the density for and note down the volume (v). For easier calculation take 1 liter of the liquid. Now take a measurement of the mass of the cylinder with the liquid (m2) in it and write it down. Subtract the mass of the empty cylinder from the mass of the cylinder and liquid combined to get the mass of the liquid (m = m2 - m1). Now divide the result z by the volume (v) of the liquid. density = m/v
What are the advantages of using a graduated cylinder than a ruler?
well with a graduated cylinder you can measure liquid
What is the best technique of using a graduated cylinder?
To accurately measure the volume of a liquid using a graduated cylinder, make sure to read the meniscus at eye level to avoid parallax error. Pour the liquid slowly and carefully to prevent spills and ensure an accurate measurement. Always use the smallest graduated cylinder that can hold the volume of liquid you are measuring for increased accuracy.
How will the result be affected by the wet graduated cylinder?
Using a wet graduated cylinder would introduce a source of error in measuring the volume of a liquid, as the presence of water could affect the accuracy of the measurement. The water might cling to the inner surface of the cylinder, altering the volume reading. It is recommended to ensure that the graduated cylinder is dry before measuring the volume of a liquid to minimize potential errors.
How can you find the density of an unknown liquid?
To find the density of an unknown liquid, you can measure its mass using a scale and then measure its volume by using a graduated cylinder or displacement method. Divide the mass by the volume to calculate the density of the liquid.
What is the accurate apparatus to measure volume of water?
Depending upon the amount of substance you are using and what it is, you could use a graduated cylinder, Erlenmeyer flask, or a beaker.
If a cylinder of radius 2cm and height 4cm is submerged in a graduated cylinder of radius 3 cm containing a liquid By how much does the liquid rise?
The displaced liquid volume is equal to the volume of the cylinder. The volume of the cylinder is πr^2h, so in this case it is π(2cm)^2(4cm) = 16π cm^3. The volume displaced is equal to the rise in the liquid level in the graduated cylinder. Using the formula for the volume of the liquid in a cylinder (πr^2h), we can solve for the height (h). The rise in the liquid level will be approximately 1.06 cm.
How do I find the volume of an irregular object using a graduated cylinder?
To determine the volume of an irregular object using graduated cylinders, you fill a graduated cylinder with water right to the top, then submerge the object in the water. Measure the water that overflows using a second graduated cylinder, and read the water level in it in cc's or cubic inches. That is the object's volume.
