0
I suppose the question is what your plans are for the rock sugar.
If you know the density, then you can estimate the volume by using the weight.
You can drop it in a liquid with a measured amount of volume, and check for volume changes. The problem is that the most common liquid one might use is water which will also slowly dissolve the sugar. This may or may not be appropriate depending whether you need to use the sugar later, or if you are planning on dissolving it. A quick reading would be fairly accurate. I'm assuming that the sugar will dissolve less readily in oils, but they may leave an inappropriate residue. Perhaps looking at the solubility in Toluene or Methylene Chloride.
You can also calculate the specific gravity if you can get a weight in air and a weight in water. And from this you can calculate the volume.
You could also crush some or all of it into a granulated form which might be easier to measure, or mix smaller and larger crystals and measure.
Add your answer:
Earn +20 pts
Can a rocks volume be 250 mL?
Yes. It would be hard to find a rock with that volume, but I'm sure there is one out there.
How can you find the volume of a small rock using only water and either a measuring cup or a graduated cylinder?
Fill the cylinder with water to a marked point. Then place the rock in the water and measure how much the water level rises. That will give you the amount of volume displaced by the rock and so the volume of the rock.
How do I find the volume of a rock?
Irregularly shaped objects have no formula for finding the volume. So, to find the volume of a rock, one method is to measure how much water the rock displaces. You simply need some sort of container that measures the volume of liquids and you need some water. The container should be large enough to put the rock in. First, fill the container to a certain volume, noting what that volume is and making sure that enough water is used to completely cover the rock when you put the rock in the container. Next place the rock into the container and measure the new volume indicated by the water. Subtract this new volume with the old volume, and the answer will be the volume of the rock. Another method is to use the rock's mass and density to calculate the volume. This can be tougher because you might not know what type of rock you have and many rocks are composites of different types of rocks. Some internet websites give the densities of different rocks. The website http://www.earthsci.unimelb.edu.au/ES304/MODULES/GRAV/NOTES/densities.html gives some simple densities. But if you have all this information, the volume can be determined by measuring the mass of the rock and dividing that number by the density.
How do you find the volume of a rock?
place the rock in a large container that is fillec to the brim with water, making sure you know how much water you put in. Place a tray underneath (or something similar) and place the rock in. Wait until the water stops moving, then measure the amount of water on the tray. The amount of water in the tray is the volume of the rock. E.g. the water in the tray was 20ml, so the volume of the rock is 20cm3.
How could you find the volume of a small rock using only a graduated cylinder and rock?
Note the level of water in the graduated cylinder. Place the rock into the water carefully. Note the higher level to which the water rises. The difference between the old level and the new level is the volume displaced by the rock.
How do you find out the volume of a rock?
Height times width times length equals the volume of the rock.
How do you find the volume of sugar?
To find the volume of sugar, you would need to measure the length, width, and height of the container holding the sugar. Multiply these measurements together to calculate the volume. If the sugar is loose and not in a container, you could estimate the volume by pouring it into a measuring cup or using displacement by submerging it in a liquid and measuring the rise in volume.
How would you find the volume of an irregularly shaped object such as rock?
You can find the volume of an irregularly shaped object, like a rock, by using the water displacement method. Submerge the object in a known volume of water in a container. Measure the increase in water level, which equals the volume of the rock.
How would you use your calibrated bottle to find the volume of the rock?
Place a specific amount of water in your bottle. Record the volume. Place the rock in the bottle. Read and record the new volume of water. Subtract the first volume measurement from the measurement after you added the rock. The difference is the volume of the rock.
How do you find the volume of an odd size rock?
The volume of an odd size rock can be obtained through methods like displacement method.
How would you find the density of an irregularly shaped object such as a rock?
To find the density of an irregularly shaped object like a rock, you can use the water displacement method. First, measure the volume of water displaced when the rock is submerged in a known volume of water. Then, divide the mass of the rock by the volume of water displaced to calculate the density.
What is German rock sugar?
rock sugar = Kandis rock sugar = Kandiszucker
How do you find mass of a rock by its density?
Determine its volume by how much water it displaces, then divide mass by volume
How can you find the volume of a rock that is too big to fit into a graduated cylinder?
One way to find the volume of a large rock is to use the water displacement method. Fill a container with a known volume of water, then carefully lower the rock into the water. Measure the change in water level to determine the volume of the rock.
How can you find the density of a rock or key?
Find the mass using a scale. Find the volume by the water displacement method. Divide mass by volume and that equals density.
How do you find density of a rock?
To find the density of a rock, measure its mass using a scale and its volume using displacement method or geometric calculations. Then, divide the mass by the volume to calculate the density of the rock. Density is typically expressed in units such as grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).
Describe a method that the student could use to find the volume of this rock?
The student can find the volume of the rock by using the water displacement method. First, fill a container with water and note the water level. Then, submerge the rock in the water and measure the new water level. The difference in water levels gives the volume of the rock.
