speed= frqquency*wavelength
Wavelength*Frequency = Velocity of the wave. or Wavelength/Period = Velocity of the wave.
draw a triangle and make 3 areas in the triangle. on the top is S or Speed. on the bottom left is F or Frequency. and on the bottom right is a bckwards/upside down Y for Wavelength. then S divided by For Y. and F times Y. will get you wavelength and what you need. draw what i just said.
Wavelength is halved.
You cannot because there is not sufficient information.
To measure the wavelength of a transverse wave, you would measure the distance from a point on one wave to the corresponding point on the next wave, such as from peak to peak or trough to trough. This distance represents one full wavelength of the wave.
The wavelength of a transverse wave is the distance between two consecutive peaks or troughs of the wave.
The wavelength of a transverse wave can be found by measuring the distance between two consecutive points of similar displacement or phase along the wave. This distance represents the distance traveled by the wave during one complete cycle of oscillation. Mathematically, the wavelength can be determined by dividing the wave speed by its frequency.
You can decrease the wavelength of a transverse wave by increasing the frequency of the wave. This is because wavelength and frequency are inversely proportional in a wave, so increasing the frequency will result in a shorter wavelength.
The lowest point on a transverse wave is called the trough
A wave is composed of an amplitude and a wavelength. A transverse wave contains oscillations perpendicular to the direction the wave is traveling, for instance, a sine wave.
The distance from crest to crest in a transverse wave is called the wavelength. It is the distance between two consecutive identical points on a wave, such as between two peaks or two troughs.
The relationship between wavelength and frequency in a transverse wave is inverse. This means that as the wavelength of the wave increases, the frequency decreases, and vice versa. Mathematically, the relationship can be expressed as λ = v/f, where λ is the wavelength, v is the speed of the wave, and f is the frequency.
The wave with the greatest frequency will have the greatest wave speed. Wave speed is determined by multiplying wavelength by frequency. If two waves have the same wavelength but different frequencies, the one with the higher frequency will have the higher wave speed.
If I understand the question correctly, that's one-quarter of a full cycle, so it is 1/4 of the wavelength. The wavelength varies from wave to wave - and this has nothing to do whether the wave is transverse or longitudinal.
Crest to trough
The distance between 2 crests on a transverse wave is called the wavelength. It is typically measured in meters or any other unit of length.