-- If you have a metric measuring tape, there's a mark at 2.0 meters.
-- If you have an "English" measuring tape, measure off 6feet6-3/4inches ; you'll be almost exactly right on.
Chat with our AI personalities
On a standard tape measure, the smallest unit typically displayed is 1/16 of an inch. Therefore, .65 on a tape measure would be read as 5/8 of an inch. This is because .65 is equivalent to 13/20, which simplifies to 5/8 when reduced to the nearest 1/16 increment on the tape measure.
(20+2w)x(12+2w)-(12x20)=68 w=1
20 x 20 metres
3.28084 ft = 1 meter 20 ft = (20 / 3.28084) = 6.096 meters 40 ft = (40 / 3.28084) = 12.192 meters 20ft by 40ft = 6.096 m by 12.192 m. This is what you asked for. You didn't ask for the area of a plot measuring 20ft by 40ft. If you wanted the area, you would have had to: -- ask for "square meters" -- guarantee that the plot is rectangular, i.e. the corners are right angles
Make a 3 4 5 triangle on the ground.You need 3 tape measures ( 25 ft long ) or 1 string 15 ft long and another 20 ft long and 1 25 ft tape measure. Measure a 15 ft line one direction and a 20 feet line as close to perpendicular (90 degrees) to the 15 ft line. Use the 25 ft tape measure to make sure the end points of the 15 and 20 ft lines are exactly 25 ft apart. You don't have to measure 15,20, and 25, but I suggest making the lines as long as possible to make sure the 90 degree angle is accurate as possible.
Tape measures are useful for measuring distances that are too large to measure with your ruler.
To measure the height of a 20-liter jerry can, you can use a measuring tape or a ruler. Place the jerry can on a flat surface and measure from the base of the can to the highest point. Ensure that the measuring tool is positioned vertically to get an accurate measurement. By doing so, you can determine the height of the jerry can in centimeters or inches.
they measure it by measuring 20 of them and then divide only 1 of it by the answer they got from the 20.
0.16 measuring spoons of turmeric has been present in 500mg of turmeric in standard measuring spoons.
Invalid conversion: square meters is a measure of area and linear meters is a measure of length or distance.
The answer is 33.55 sqm
On a standard tape measure, the smallest unit typically displayed is 1/16 of an inch. Therefore, .65 on a tape measure would be read as 5/8 of an inch. This is because .65 is equivalent to 13/20, which simplifies to 5/8 when reduced to the nearest 1/16 increment on the tape measure.
For an experiment on factors affecting the stopping distance of a toy car rolling down a ramp, you would need a ramp, a toy car, a measuring tape or meter stick to measure distance, markers to indicate stopping points, a stopwatch to measure time, and possibly different surfaces or materials to test different variables such as friction.
A measure of distance. If you would like it converted to another measure of distance, please specify.
6.1 meters 240 inches 6096mm
20.4 inches is the same as 20 13/32 I believe
(20+2w)x(12+2w)-(12x20)=68 w=1