With sonar
Fathom which is six feet or two yards in depth .
Measure the length,width, and depth of the are you want to spread the mulch.
Measure the depth and width using the same units. Divide the depth measurement by the width measurement.
is to measure the depth ,and length of carcass
The answer depends on what characteristic you want to measure: its temperature, refractive index, circumference, depth, volume, etc.
Undersea canyons can vary in depth, with some reaching depths of over 3,000 feet or more. The depth of an undersea canyon depends on various factors such as the geology of the area, tectonic activity, and ocean currents.
The Trieste was that famous submarine. It is actually considered a bathyscaphe, but the term submarine could be applied. It dove to the deepest undersea point in the world, the Challenger Deep in the Mariana Trench, where the water depth is nearly 36,000 feet. A link is provided to the Wikipedia article on this revolutionary undersea vehicle.
in bomberson missilesin artillery shellsin depth chargesin torpedosin landminesin undersea minesetc.Many of these systems have been retired.
Depth
The location and information of the ships whereabouts are still classified by the United States Navy.
Personally I couldn't fathom out what he was talking about. The ship wreck lay at a depth of fourteen fathoms.
Earthquakescan be measured using the Mercalli Scale, which ranks earthquakes on their effects, such as how they were felt and the damage they caused. Undersea earthquakes can't be measured with this scale because they do not cause this type of damage
To measure the jamb depth of a door, use a tape measure to determine the distance from the front edge of the door frame to the back edge. This measurement will give you the jamb depth of the door.
Measure the depth using a metric ruler!
You can use a penny for that. Put in between the threads then mark and measure the depth on the penny.
No, a calorimeter is not designed to measure depth. It is a device used to measure the amount of heat released or absorbed in a chemical reaction or physical process. To measure the depth of something, you would typically need a different type of instrument, such as a ruler, tape measure, or a depth gauge.
To accurately measure the depth of a door jamb, use a tape measure to determine the distance from the front edge of the door jamb to the back edge. This measurement will give you the depth of the door jamb.