To replace the air springs on an 89 LSC, you will need to access the suspension components located in the rear of the vehicle. Start by supporting the vehicle securely with jack stands and removing the rear wheels. Then, detach the air lines and electrical connections from the air springs. Finally, remove the bolts securing the air springs to the suspension and replace them with the new air springs, making sure to reconnect the air lines and electrical connections.
no , since there is a function which lsc but not usc.
(89)56 +89 = 5073
34% of 89= 34% * 89= 0.34 * 89= 30.26
12% of 89 = 12% * 89 = 0.12 * 89 = 10.68
9% of 89= 9% * 89= 0.09 * 89= 8.01
yes, they will fit, no problem but they will not bolt up to the factory exhaust
how do you replace the window regulater on a 89 cadillac deville?
replace your head light switch
I got one from my local Ford dealer.
how do i replace the wires on a starter switch on a 89 ford f-150
There is no such thing as an 89 El Camino
how do i take the fan cluch off a 89 ford ranger yo replace
Ok ive ideas but need to know what an LSC is REagrds
the center cover can be removed and replaced
Passenger side front, loosen 4 screw bolts and pull back and you will see the filter.
It's part of the model number: eg. 17.5" Antares LSC #04-549
I have an 89 LSC and the PCV is located at the back of the plenum on the intake manifold. There is a hose coming out of it--pull up on the hose until the pcv comes out or the hose pops off of it----Its a stretch for sure and a flashlight is definitely recommended! there is a wire filter under the pcv. a deck screw taped to the end of a Phillips screwdriver is the best tool to use to remove it for cleaning. when you replace your pcv, clean the wire filter under it. the pcv valve, grommet and wire filter are still available from the dealerships. .