There's the rectangular prism, the triangular prism, hexagonal prism, pentagonal prism, the cube, and the octagonal prism.
A Triangular Prism A Rectangular Prism An Octogonal Prism (basically 3D Shapes)
a triangular prism has to triangular bases while a rectangular prism has a rectangle as the bases.
Cylinder (circular prism) Cube (square prism) Cuboid (rectangle prism)
A rectangular prism has 6 faces. A pentagon prism has 7 faces. Therefore a rectangular prism has one less face than a pentagonal prism.
When the mileage is displayed, hold down the 'enter' button, you should hear a beep, and it should reset. This is the procedure to reset anything on the display.
Next to the odometer is a button. Press it to switch between odo and trip. While in trip, hold it to reset the tripometer.
No reset button. Look for a fuse.
i think you have to push in the tripometer turn on ignition and then wait second, turn off the ignition and turn back on i did it once but cant remember all of it
There isn't a reset for the oxygen sensors. When a repair is made then you need to have the computer cleared.jd
Turn car off hold the tripometer reset button turn on acc (Press Key in but don't start) after turning on acc release the trip reset button press the minute button on the gauge cluster (I'm pretty sure it's M but if that doesn't work try H)
I have a 2001 Prism, and all i did was replace the spark plugs, and reset the battery it went away....
Type your answer here... yes
If it is a Chrysler or gm model turn key to accessory mode and press accelerator down three times holding last time for approx.3 seconds if it is a Toyota make sure tripometer is on odometer setting and turn off vehicle,hold tripometer stick in,while holding in turn car to acc setting.if done properly odometer will turn to lines.keep holding until lines are gone and turn back to all zeroes.....youre welcome
139.8/9.325=14.991957mpg
Tripometer is a great app for tracking your mileage. Milebug is another that is recommended.
tripometer doesn't work either.