0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Is Number Lock and Caps Lock are both toggle keys?
True
How do you open a door lock with a card?
Slide the card through the slot where the lock is by the door. Set the card where the lock would be. Now open the door.
How do you open a combination lock without combination?
You have to have a combination. If you have a key lock you don't need a combination, all it is is a lock that says master and a key to turn it and then it opens what you have in it.
Who invented the combination lock?
Joseph Loch invented the modern combination lock in 1878.
How do you unlock an IKEA Galant combination lock?
There is no way to unlock an IKEA Gallant combination lock without the actual combination. The combinations are preset prior to purchasing the lock.
How do you tighten up the chain on a 2005 Raptor 660?
there are 2 screws on the swingarm that have lock nuts on them. loosen the locknuts, tighten the screws, and then tighten the lock nuts again. there should be very small lines engraved in each side of the swingarm that let you line up both sides. make sure they are
Why doesn't my light work on Kwikset door lock?
The light on your Kwikset door lock may not be working due to a dead battery, a loose connection, or a malfunctioning light module. Try replacing the battery first to see if that resolves the issue. If the problem persists, contact Kwikset customer support for further assistance.
We have bought a house with a kwikset smart door lock and we don't have the key and don't know the code. How do you reset the code?
Contact Kwikset or call a locksmith. Maybe the former owner or real estate agent knows how to do it?
How do you fix a cupboard lock?
To fix a cupboard lock, first identify the issue such as a loose screw or damaged mechanism. Tighten any loose screws or replace them if needed. If the lock is damaged beyond repair, consider replacing the lock with a new one.
How much would an electronic door lock from Kwikset cost?
An electronic door lock from Kwikset may cost from $90 approximately, but the price is dependant on ones zip code and location within the United States of America. There are a number of stockists, such as Lowes, where one may view the looks and obtain an accurate price within their area.
2003 sorento kia door ajar ring will not go off?
I had the same problem on mine. On the door ,You will need to tighten the three screws that holds the door lock.
Which door locks are better kwikset or schlage?
In my personal opinion as a locksmith, Schlage is a better lock. The common residential locks have 5 spaces, although some have 6. Both manufactures have each. Schlage has tighter tolerances between the cylinder and plug, and 10 depths as opposed to Kwikset with 6.
How does an exterior door handle lock work?
An exterior door is usually a keyed doorknob or keyed lever. It may consist of single or multiple bolts to lock the door.
Who sells a fingerprint keypad lock and what is the price?
SONY sells a fingerprint keypad lock and it costs about 50 bucks. Read more at http://blog.tmcnet.com/blog/tom-keating/gadgets/kwikset-smartscan-fingerprint-reader-lock.asp
What are some companies that manufacture locks?
There are many manufacturers of locks. A few big companies known for making locks are Brinks, Sargent and Greenleaf, Kwikset, Schlage, and Master Lock.
How do you fix the door handle to a bedroom door that won't lock because the wall is damaged where the door locks?
When a door latch doesn't click into position, it usually means the latch and the strike plate are out of alignment. Tighten its hinge screws, then try adjusting the strike plate by loosening its screws and shifting it slightly.Try to put a wood into the damaged door space so you can lock the door.
How do you replace 2002 trailblazer tailgate handle?
Open the liftgate window.Remove the push-pin retainer from the trim panel.Close the liftgate window.Open the liftgate.Remove the screw that retains the pullstrap to the liftgate trim panel.Remove the pullstrap from the liftgate trim panel.Use a flat-bladed tool in order to carefully release the trim panel retainers.Remove the trim panel from the liftgate.Installation ProcedureInstall the trim panel to the liftgate.Ensure that the trim panel retainers are fully seated.Install the pullstrap to the trim panel. Notice: Refer to Fastener Notice in Service Precautions.Install the screw that retains the pullstrap to the trim panel. Tighten the pullstrap screw to 4 N.m (35 lb in).Close the lift gate.Open the liftgate window.Install the push-pin retainer.Close the liftgate window.Latch Replacement - LiftgateRemoval ProcedureRemove the liftgate window garnish molding.Remove the liftgate trim panel.Disconnect the outside handle rod from the bellcrank.Disconnect the bellcrank rod from the latch/lock assembly.Remove the screws that retain the bellcrank to the latch/lock.Remove the bellcrank from the latch/lock.Disconnect the electrical connector from the latch assembly.Disconnect the lock cylinder bellcrank rod (1) from the latch assembly.Remove the screws that retain the latch/lock assembly to the liftgate.Remove the latch/lock assembly from the liftgate.Installation ProcedurePosition the latch/lock assembly to the liftgate. Notice: Refer to Fastener Notice in Service Precautions.Install the screws that retain the latch/lock assembly to the liftgate. Tighten the screws to 10 N.m (89 lb in).Connect the lock cylinder bellcrank rod (1) to the latch/lock assembly.Connect the electrical connector to the latch/lock assembly.Position the bellcrank to the latch/lock assembly.Install the screws that retain the bellcrank to the latch/lock assembly. Tighten the screws to 0.7 N.m (6 lb in).Connect the bellcrank rod to the latch/lock assembly.Connect the outside handle rod to the bellcrank.Install the liftgate trim panel.Install the liftgate window garnish molding.
