Q: How do you use an overflow container to find an object volume?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

First pour water into the can until it overflows and drains. Next place an object into the overflow can, being careful not to spill. Place a beaker under the overflow can to collect the water that is displaced by the object. Record the volume in millimeters of the displaced water. This is the volume of the object.

To find the volume of an irregular shape, you need to use the water displacement method. If the object can fit into a graduated cylinder, fill the cylinder with enough water to adequately cover the object, but don't put the object inside the cylinder yet. Record the amount of water in the cylinder. Carefully drop the object into the cylinder. This will cause a rise in the water in the cylinder. Record this second volume. Subtract the first volume from the second volume, and the difference is the volume of the irregular object. For larger objects, use an overflow can.

Volume is the amount of cubic centimeters in an object. To find the volume of a regular shaped object multiply length x width x height. To find an irregular shaped objects volume put water in a container and measure the amount. Place the object in the water and measure the new volume. Subtract the old volume from the new volume and that's your answer. You would write as x cm3. Weight is gravity's pull on an object

Irregular solid volume is still measured in cm3 etcTo Find the Volume of an irregular object you can,Measure out a proportional amount of water to the object you are finding the volume ofPut the object in the container of waterSee how much the water has risen byYou now have the volume!!(The difference between the new and old volumes of water is the volume

Volume displacement is the method used to find the volume of small or irregularly shaped objects by noting the difference in the level of liquid before and after after immersing an object into a graduated cylinder or beaker of liquid. For a small object immersed in a graduated cylinder or beaker, the volume displaced by the object can be read directly from the scale on the container.

Related questions

Fill a container with water. Carefull put the object into the container and collect the overflow of water. Measure the water displaced See "Eureka"

To find the volume of an irregular object using the overflow method, you can fill a container with water and measure the volume of water it displaces when the object is submerged. The volume of the object is equal to the volume of water displaced. This method works on the principle that the volume of water displaced is equal to the volume of the object, even if the object's shape is irregular.

First pour water into the can until it overflows and drains. Next place an object into the overflow can, being careful not to spill. Place a beaker under the overflow can to collect the water that is displaced by the object. Record the volume in millimeters of the displaced water. This is the volume of the object.

Scientists typically use the water displacement method to find the volume of an irregular object. They fill a known volume container with water, measure the initial volume, then submerge the object in the water and measure the final volume. The difference in the initial and final volume provides the volume of the irregular object.

You would measure the length width and heighth. Then you would multiply them all together. <><><> A better means would be to have a container that the rock will fit in, and fill it full of water. Place the rock in the container, which will overflow. Then remove the rock, and measure the volume of water you have to pour into the container to make it full again. The volume of the water will equal the volume that was displaced by the rock.

multiply it Length- Width - Height , or measure the volume of a container of water then stick the object in and measure the volume of the object+water then subtract the volume of the water then you have the volume

An easy and low tech way to find the volume of an object is to measure the volume of water it displaces. Fill a container that has lines for measuring volume on it with enough water to fully submerge the object whose volume you will measure, but don't fill it all the way to the top. Write down the amount of water you start with, let's say 1 liter. Now put the object you want to measure into the water carefully so that you don't splash any water out and make sure that it is fully submerged. Now write down the new volume of water in the container, let's say it now reads 2.5 liters. Subtract the original volume from the new volume to find the volume of your object: 2.5L - 1L = 1.5 liters. Another way to find the volume of an object fill a container with water to the very top of the container. Place that container of water into an empty larger container. Put the object that you want to measure into the container of water slowly so that you don't spill any more water than the object pushes out on its own. When the object is fully submerged, it should have pushed out some water into the larger container. To ensure accuracy, the level of water in the water filled container that now also contains the object to be measured should still be at the very top of the container. Carefully remove the water/object filled container from the larger container so as to not spill any more water. Carefully pour the overflowed water into a smaller measuring vessel to find the volume of your object.

One common technique is the water displacement method. You submerge the irregular object in a known volume of water in a container, measure the volume of water displaced, and that volume is equal to the volume of the object.

You can find the volume of an irregularly shaped object, like a rock, by using the water displacement method. Submerge the object in a known volume of water in a container. Measure the increase in water level, which equals the volume of the rock.

One way to find the volume of a large irregular shape object is to use the displacement method. Submerge the object in a container of water and measure the volume of water displaced. This volume is equal to the volume of the irregular object.

You need to put it into a container or other measuring object and use the water displacement method. This means that you put water into the container and when the object is placed inside, you take the difference between the height of the water before and the height of the water afterward. This is the volume of the object.

To find the volume of an irregular shape, you can use the method of water displacement. Fill a container with water, then place the irregular shape in the container. Measure the change in water level, which represents the volume of the shape.