If the y coordinate does not change, it is a horizontal line.
The midpoint is (10,0). The simplest way to calculate it is to divide the change in x by 2. You can see that the difference is 20-0 = 20, divided by 2 is 10.
Translation refers to moving a shape from one location (on a coordinate grid) to another such that the size and orientation of the shape does not change.
The first abscissa will decrease by the amount of leftward translation; the ordinate will not change.
Slope is the change in y (vertical dimension) with the change in x (horizontal dimension). On a Cartesian coordinate system, the slope is equal to infinity for change in x = 0, or a vertical line.
If the y coordinate does not change, it is a horizontal line.
The midpoint is (10,0). The simplest way to calculate it is to divide the change in x by 2. You can see that the difference is 20-0 = 20, divided by 2 is 10.
Translation refers to moving a shape from one location (on a coordinate grid) to another such that the size and orientation of the shape does not change.
The horizontal change is the change in x. If the line in horizontal then the horizontal change will just be its length.
The first abscissa will decrease by the amount of leftward translation; the ordinate will not change.
Slope is the change in y (vertical dimension) with the change in x (horizontal dimension). On a Cartesian coordinate system, the slope is equal to infinity for change in x = 0, or a vertical line.
The equatorial coordinate system is usually called geocentric coordinates, which are declination and hour-angle, and the horizontal system is called altitude and azimuth. The two coordinate systems are tilted relative to one another by 23.4 degrees, the Earth's axial tilt, in the plane of the local meridian of the observer. As time passes, in geocentric coordinates the declination stays the same while the hour angle increases at 15 degrees per hour. In the horizontal system both coordinates change, with the altitude increasing from zero as an object rises, then reaches its maximum altitude when due south, and then it gradually sets in the west.
the term for the ratio of vertical change over horizontal change is slope
You recreate a figure that is equal in side lengths, angles, and area in a new place on the x-y plane. For example if point a is on coordinate(2,2) and you are to translate it 1unit to the right and 2units down, the coordinates of point A' would be (3, 0). Up and down change the y coordinate and left and right change the y coordinate. Once you've translated all the points, connect the dots.
(x, y)Open parenthesis, x coordinate [horizontal/latitude], comma, y coordinate [vertical/longitude], close parenthesis.For example, (2, 3) would be two spaces right and three spaces up from the origin. If you change the direction (again, from the origin), use negatives. (-2, -3) is two spaces left and three spaces down.
No, rise is the vertical change. Run is the horizontal change.
The x-coordinate changes.