The weight of an 8-foot steel girder can vary significantly depending on its dimensions, profile, and the type of steel used. For example, a standard I-beam might weigh between 30 to 50 pounds per foot. Therefore, an 8-foot long steel girder could weigh approximately 240 to 400 pounds. To get an exact weight, specific details about the girder's dimensions and material specifications would be needed.
A half-inch thick sheet of plate steel measuring 4 feet by 8 feet has a volume of 128 cubic feet (4 ft x 8 ft x 0.5 ft). Steel has a density of approximately 490 pounds per cubic foot. Therefore, the weight of the sheet would be about 62,720 pounds (128 cubic feet x 490 pounds/cubic foot).
Got a calculator? Multiply 4 X 12 X 8 X 12 X 0.5 X 0.283 answer is pounds (lbs) LINK: http://wiki.answers.com/Q/What_is_the_density_of_low_grade_steel
No, 8 inches is not 66.6% of a foot. A foot consists of 12 inches, so 66.6% of a foot would be 8 inches (0.666 x 12 = 8). In this case, 8 inches is exactly two-thirds of a foot.
8
how many gallons of water will a tank that is 5 foot by 4 foot by 8 foot hold
Using density of steel @ 490.06 pounds per cubic foot (approx) 8 * 10 * (1/12) * 490.06 = 3267.07 pounds (approx)
no you could just be heavy boned
The weight of steel diamond plate per square foot depends on its thickness. Steel diamond plate that is 3/16 inches thick weighs 8.70 pounds per square foot. 3/8" plate weighs 16.35 pounds per square foot.
you are at a normal ,weight, but on the heavy side
A half-inch thick sheet of plate steel measuring 4 feet by 8 feet has a volume of 128 cubic feet (4 ft x 8 ft x 0.5 ft). Steel has a density of approximately 490 pounds per cubic foot. Therefore, the weight of the sheet would be about 62,720 pounds (128 cubic feet x 490 pounds/cubic foot).
The 14g 5/8" Steel Casted MCQUEEN SKULL Wholesale Tongue Body Jewelry weighs 1.15 grams.
8 foot (2 meters) and weighs aprox 110 pounds (apparently)
Buy a roll of 6 mil plastic sheeting from any hardware store sizing varies Like 8 foot by 120 foot
The Sydney Harbour Bridge has an arch shaped structure. It is the longest span bridge in the world. Bridge length is 1,150 m. There are two large sandstone pylons at each end, a heavy criss cross steel arch arcs across from the middle of these pylons. Many steel hangers about 1 foot square hang down from the arch to support the steel deck. The deck has 8 lanes for traffic, two rail lines a foot way and a cycleway. You can find some pics on the link below.
Not at all! That's actually quite thin for 5'5, and is considered slightly underweight.
yes you have to dance using your left and right foot. i would know because i danced for 8 long long years
It is: 8*8*7 = 448 cubic feet