Want this question answered?
Be notified when an answer is posted
pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.
1 amp = 1000 milliamp, so 1 milliamp = (1/1000) amps = 0.001 amps
1 cm = 1/100 meter
Milliamp
I may be completely off base here, but since 1 meter = 39.3700787 inches (Google) and the scale is 1 inch to 1 meter, I beleive that makes it 1:39 scale. Basically, one inch on the map scale equals 39 inches in the real world.
pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.pm is short for pico-meter, or 10-12 meter. That's a trillionth of a meter (using the short scale), or a billionth of a meter on the long scale.
The charging system could be checked at the battery using a volt meter ,place the red lead on the positive terminal the black on the negative ,then set the scale to at least 20 volt scale then start the jeep and read the meter over 12.8 volts is okay 15 volts is to high.
the answer is a meter scale
1000 microamps = 1 milliamp
The mid-scale point of a thermocouple meter is the point at which the output voltage of the thermocouple is midway between the minimum and maximum values it can measure. This point is typically used to check the accuracy and linearity of the meter's readings.
1 amp = 1000 milliamp, so 1 milliamp = (1/1000) amps = 0.001 amps
Linear Scale
A spring meter is a meter that measures weight. It is a type of scale which uses a spring.
The main part of a scale meter is the scale itself, which consists of markings and numbers that indicate measurement units. The scale is used to accurately measure weight or other quantities.
by a volt meter / ameter
Milli- is not an abbreviation; it is a prefix which means one thousandth. For example, a millimeter is a thousandth of a meter, a milliamp is a thousandth of an amp, and a milligram is a thousandth of a gram.
The pressure is checked with a gauge, the electronics are checked with an appropriate scan tool and a volt/ohm meter.The pressure is checked with a gauge, the electronics are checked with an appropriate scan tool and a volt/ohm meter.