0
Add your answer:
Earn +20 pts
What is the function of Screw Driver Set?
Tightening or loosening screws.
How long is 13 feet centimeters?
396.24 centimeters
What is the mechanical advantage of a screw driver?
it applies torque to fulfill its design capabiities
What is the Ideal Mechanical Advantage when a screwdriver with a handle of radius 1.2 cm is used to remove a screw in the back of a computer and the screw moves out 0.20 cm on each turn?
There is no advantage whether the handle is 1.2 cm or 10 cm, the screw will still only make one revolution. The reason being is that both the screw driver and the screw become part of the whole. The only increase in the screws revolutions is if the screw driver is geared to make more than one turn of the screw.
John's nose is 8 centimeters and 7 mm long how long is this in centimeters?
8.7 cm
Where do you use a Philips screw driver?
You use a Phillips screw driver on a Philips screw.
What is screw gripping screw driver?
A screw driver that grips tight screws instead of slipping and damaging the screw.
How long are male driver ants?
Male driver ants are typically around 1-2 centimeters in length. They are smaller than the larger worker ants in the colony.
How do you get a screw driver in Club Penguin?
There is no screw driver on club penguin.
What is a screw driver simple machine?
A screw driver is an inclined plane.
How do you unscrew a screw?
With a screw driver...
Which would be the better choice for driving a screw into a board a long screwdriver with a narrow handle or a short screwdriver with a wide handle?
Long screw driver with a narrow handle would give the most torque, therefor it would be best It would also depend on the blade of the screw driver. The blade should fit well into the slot in the screw so if the long screw driver with the narrow handle had a small narrow blade that was too small for the screw then another one would be better.
What purpose does the screw driver serve?
A screw driver is used to screw, screws into wood it is a very useful tool.
What is the purpose of screw driver?
The use of screw driver is to pull out and in the screws
How do you remove the tilt knob on a 04 dodge ram?
With a T20 torx screw driver. It is held on by one screw.With a T20 torx screw driver. It is held on by one screw.
How do you remove the cocking bolt from long strike cs-6?
Take a flat-head screw driver and put it between the bolt handle and the gun. Push down on the screw driver to push the bolt away from the gun.
Who is the driver who had never an accident?
a screwdriver Screw driver
