0
What else can I help you with?
How long of a pool hose do you need for a 35 foot pool?
Probably about same length so you can vacuum all sides.
How long does it take to fill a pool 2 gallons a minute?
My pool which is a small to medium sized pool took about 2 days.
Calculate the height of a pool that is 15m long 6m wide 216m in volume?
how to find the dept of the pool if it is 15m long and 6m wide
What is something that would be 10 yards long?
A pool
What is the length of Swimming pool lane markers on pool floor?
As long as the floor: in other words, wall to wall.
Should you run the pool pump with a pool vacuum?
Yes
Can you put chemicals in the pool while the vacuum is in?
It is generally safe to add pool chemicals while the vacuum is operating as long as you follow the manufacturer's instructions for both the pool chemicals and the vacuum. However, it may be more effective to add chemicals when the vacuum is not running to allow the chemicals to distribute evenly throughout the water before the vacuum starts circulating.
How long before pool vacuum can be used in new marbelite pool?
You should wait about 2 weeks before using a wheeled vac head OR follow the advice of the installer. He is the last authority on that subject.
How long of a pool hose do you need for a 35 foot pool?
Probably about same length so you can vacuum all sides.
Which pool vacuum can handle acorns?
Any pool vacuum can, including the Polaris.
What is the best underwater vacuum cleaner on the market for pool cleaning?
According to my research the brand Zappy has very good quality vacuum cleaners that operate on their own. This eliminates the hard tasks of doing it yourself.
How do you vacuum a doughboy above ground pool?
How do I vacuum an above ground doughboy pool?
What pool vacuum is better for a vinyl pool?
A vacuum head that has a brush on the bottom - no wheels.
How do I turn on the pool vacuum?
To turn on the pool vacuum, locate the power switch on the vacuum unit and flip it to the "on" position. Make sure the vacuum is properly connected to the pool's filtration system before turning it on.
Why does DE flow out the pool return lines when using the pool vacuum line?
You should have NO D.E. going back into the pool when you vacuum or anytime else. If you do have it going back in, you need to open the filter and check to see what part is broken, loose or missing.
How do I turn on a pool vacuum?
To turn on a pool vacuum, first connect the vacuum head to the telescopic pole and attach the hose to the vacuum head. Then, lower the vacuum into the pool and connect the other end of the hose to the skimmer or designated suction port. Finally, turn on the pool pump to start the vacuuming process.
How should pool water be treated after finding a dead frog in the pool?
First of all remove all remains of the cat. then super chlorinate it and leave it to filter for a day. check the chlorine levels and every thing should be OK after that. so long as the chlorine levels are correct the water should be properly disinfected.
