To determine how many 2x6x16 boards are needed to cover 2000 square feet, first calculate the area of one board. A 2x6 board is actually 1.5 inches by 5.5 inches in dimensions, which converts to 0.125 feet by 0.4583 feet, giving an area of about 0.0576 square feet per board. Dividing 2000 square feet by 0.0576 square feet per board results in approximately 34,722 boards. Therefore, you would need around 34,722 of these boards to cover 2000 square feet.
I would guess about 70-80 bales
A normal pallet of sod covers 500 square feet
3104.72
That depends entirely on what kind of sand how deep you spread it. As an approximation, you could assume a bulk density for dry sand of about 110 lb/ft3. One ton (2000 lb) of sand would thus be about 18.18 ft3 or 0.673 yd3. If you spread it 6 inches deep you could cover about 4 square yards. At a foot deep, you would cover 2 square yards. At 3 inches deep you would cover 8 square yards. At 1 inch deep you would cover 24 square yards Reported bulk densities for sand range from 78 lb/ft3 for molding sand to 130 lb/ft3 for moist sand.
The coverage of a box of 2000 cap nails depends on the spacing of the nails and the size of the squares being covered. For example, if nails are spaced 12 inches apart, one box could cover approximately 200 square feet, assuming each square is 1 square foot. However, the actual coverage may vary based on the specific application and nail arrangement. For precise calculations, it's essential to consider these factors.
I would guess about 70-80 bales
A 2,000 square foot blanket will cover an area of approximately 2,000 square feet.
To cover 2000 square feet with a few inches of straw, you typically need about 2 to 3 bales of straw per 100 square feet for a depth of 2-3 inches. Therefore, for 2000 square feet, you would require approximately 40 to 60 bales of straw, depending on the thickness of the coverage and the density of the straw. It's essential to consider the specific type and packing of the straw bales, as they can vary in size and weight.
A normal pallet of sod covers 500 square feet
Five--a roll will cover 400 square feet of area.
That'll depend on what you're covering them with. A lot of square feet if you're covering them with 2000 pounds of silk or styrofoam, not many square feet if you're covering them with 2000 pounds of lead or stones or gold.
Approximately 2000 SQ Ft
To determine the number of feet in 2000 square feet, you would need to calculate the square root of 2000. The square root of 2000 is approximately 44.72 feet. This means that a square with an area of 2000 square feet would have sides that are approximately 44.72 feet in length.
3104.72
That depends entirely on what kind of sand how deep you spread it. As an approximation, you could assume a bulk density for dry sand of about 110 lb/ft3. One ton (2000 lb) of sand would thus be about 18.18 ft3 or 0.673 yd3. If you spread it 6 inches deep you could cover about 4 square yards. At a foot deep, you would cover 2 square yards. At 3 inches deep you would cover 8 square yards. At 1 inch deep you would cover 24 square yards Reported bulk densities for sand range from 78 lb/ft3 for molding sand to 130 lb/ft3 for moist sand.
Metropolitan Sydney cover about 2000 square kilometers, has 4 million inhabitants and about 300 suburbs .
2000