0
Add your answer:
Earn +20 pts
How many squares in a 8x16 roof?
12
How many 8x16 cement blocks would it take to cover 144 square feet area?
Assuming they are 8 inch*16 inch blocks, 144 square feet = 144*12*12 square inches. So number of blocks required = 144*12*12/(8*16) = 162
How many 8 by 8 by 16 inch block and 300 square feet?
It depends on whether the blocks are laid with a 8x8 face up or 8x16.
How many square feet are in 8x16?
128 square feet.
How many 8X16 blocks do you need for 85 by 6 feet wall?
The wall is 85 ft x 6 ft = 510 square feet (face area)One block is 8 inches by 16 inches = 2/3 ft x 4/3 ft = 8/9 square foot.Divide 510 by (8/9) = 510 x (9/8) = 573.75.574 blocks. Allow a few extra formistakes!By the way, check that there will be an even number of rows: 6 ft high = 6x12 = 72 inches. 72/8 = 9. OK, there will be 9 rows of blocks.
How many squares in a 8x16 roof?
12
How many 8x16 cement blocks would it take to cover 144 square feet area?
Assuming they are 8 inch*16 inch blocks, 144 square feet = 144*12*12 square inches. So number of blocks required = 144*12*12/(8*16) = 162
How many 8 by 8 by 16 inch block and 300 square feet?
It depends on whether the blocks are laid with a 8x8 face up or 8x16.
How many square feet is 8X16?
To find the area of an 8x16 rectangle in square feet, you simply multiply the length by the width. In this case, 8 multiplied by 16 equals 128 square feet. Therefore, an 8x16 rectangle has an area of 128 square feet.
How many square feet are in 8x16?
128 square feet.
How many ounces are in 8 pounds and 15 ounces?
(8x16) + 15 = 143 ounces
How many square feet in a 8x16 tile?
The answer depends on the units used for the measurements given in the question.
How many blocks in 1 mile in Phoenix?
In the greater Phoenix area there are typically 8 blocks in a mile.
How many square blocks are in a mile?
Miles measures distance. Square blocks measures area. Therefore, you can not compare the two.
How do you figure up how many cinder blocks you need?
Calculate the exterior face area of he wall you want to build and the face area of the side of the cinder block (add about 1/2 inch to length and 12 inch to width for mortar thickness). Divide the wall area by the block area This is the number of blocks you require. This is how I figure out how many blocks you will need: First measure the length of walls for the blocks in feet. Second divide that number by 4 then multiply the total by 3. That will give you total blocks needed for one course of blocks.
How many 8X16 blocks do you need for 85 by 6 feet wall?
The wall is 85 ft x 6 ft = 510 square feet (face area)One block is 8 inches by 16 inches = 2/3 ft x 4/3 ft = 8/9 square foot.Divide 510 by (8/9) = 510 x (9/8) = 573.75.574 blocks. Allow a few extra formistakes!By the way, check that there will be an even number of rows: 6 ft high = 6x12 = 72 inches. 72/8 = 9. OK, there will be 9 rows of blocks.
How many 16x16 blocks would you need to lay for a 12x12 area?
Be more specific with your question. Are the blocks measured in inches, feet, millimeters, centimeters etc. Same applies to the area.
