To calculate the amount of BTUs required to melt 1 ton (2000 pounds) of steel in 1 hour, we need to consider the specific heat capacity of steel, which is approximately 0.11 BTU/lb°F. The melting point of steel is around 2500°F. Assuming the steel starts at room temperature (70°F), it would take approximately 2,200,000 BTUs to melt 1 ton of steel in 1 hour [(2500°F - 70°F) * 2000 lbs * 0.11 BTU/lb°F].
it takes 2 minutes for it to melt
I't will take about 5 seconds because snow is water.
about an hour
You can take up to 12 aspirin in a 24 hour period.
1 hour = 3,600 seconds10 seconds = (10 / 3,600) = 1/360 of an hour.(14 x 360) = 5,040 steps in 1 hour, if you can keep it up for a whole hour.
It depends on the composition of the steel as there are many different grades and types of steel.
1 hour to 2 hours
apparently 1 hour
55 mintunes 25 seconds and 73 out 100 of a second this save you time
To know how fast this will melt you need to know the amount of stainless steel and the temperature of the stainless steel at the beginning. Then using the formulas of energy needed to heat it (Cp, I think) and melt it (enthalpy) you can calculate when it will melt.
how many hour will take flight from tokyo to Mexico
The time it takes for an ice cube to melt outside will depend on various factors such as the temperature, humidity, and sunlight. In general, an ice cube may take anywhere from a few minutes to half an hour to melt completely in outdoor conditions.
20 minutes
it will take him 56 hours
The time it takes to melt a metal with a butane lighter will vary depending on the type of metal and the intensity of the heat produced by the lighter. Generally, it would take a significant amount of time and may not be practical to melt metal with just a butane lighter.
The time it takes for an ice cube to melt depends on the temperature of its surroundings. In a room temperature environment, a regular sized ice cube may take around 10-20 minutes to completely melt.
2 2 2