50um is 0.05mm
50 of anything is normally smaller than 62.5 of the same thing.
1 micron = 0.001 millimeter
0.001 micron
1 micron is about 0.00003937 inches.
Not possible to answer ! A micron - is a linear measurement... GSM is a measurement of weight !
50 micron will filter more than 25micron
50um is 0.05mm
Micron (µm) and GSM (Grams per Square Meter) are units of measurement for thickness and weight, respectively. To convert microns to GSM, you would need information about the material's density. The formula for this conversion is: GSM = (Microns * Material Density) / 10.89 Without knowing the material's density, it's not possible to directly convert microns to GSM. So, you'd need to obtain the density of the material in question to make this conversion. The formula assumes that the density is in grams per cubic centimeter (g/cm³). Once you have the density of the material, you can plug it into the formula to convert any micron thickness to GSM.
how can u make tracing and drafting film 50 micron
50 of anything is normally smaller than 62.5 of the same thing.
No smaller (exactly half to be precise)
GSM (grams per square meter) is a unit of measurement used for the weight of paper or fabric. A micron (µm) is a unit of length equal to one millionth of a meter. To convert GSM to microns, you would need to know the density of the material in question. The relationship between GSM and microns is not a direct conversion and would depend on the specific material being measured.
A gsm is a measure of mass per unit area while a micron is a measure of length or distance. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
1 micron = 0.001 millimeter
0.001 micron
ANSWERIn the case of polythene, gauge can be converted to thickness by dividing by four to get the thickness in micron or dividing by 4000 to get the thickness in mm. Here are some common examples:100 gauge = 25 micron = 0.025mm120 gauge = 30 micron = 0.03mm200 gauge = 50 micron = 0.05mm250 gauge = 62.5 micron = 0.0625mm400 gauge = 100 micron = 0.1mm