0
1MCF = 1 MMBTU so 130 MCF = 130 MMBTU
Let me know if you have any confusion
Unfortunately, this is incorrect. An MCF of natural gas is a thousand cubic feet; an MMBTU is a million BTU of energy. (The confusion stems from the use of M for thousand, probably from the french mille.) So the correct answer is 130,000 MMBTU.
Add your answer:
Earn +20 pts
How to convert Therms to MMBtu?
I was just researching this same question today. Here's what I found hope it helps. 1 Therm = 100,000 BTU 10 Therms = 1MMBTU ( Million BTU's ) Therefore to convert from MMBTU to Therms, multiply the MMBTU figure by 10 to get Therms. Note: Therm to BTU conversion is based on the amount of energy obtained from burning 1 Therm (100 cubic feet of natural gas). This value is not exact, but close, and could be different from one natural gas field to another.
How do you convert 27505 cubic feet of natural gas into metric tons?
About .58 t
How much is 576 cubic feet in feet?
Question is meaningless. Cubic feet are cubic feet!
How many feet are 1.2 cubic feet?
1.2 (cubic feet) = 2073.6 cubic inches
How many feet is there in 1 cubic meter?
one cubic meter is 35.3 cubic feet
Convert mcf to mmbtu?
To convert thousand cubic feet (mcf) to million British thermal units (mmBtu), you need to know the specific heat content of the gas being measured. The conversion factor can vary depending on the type of gas. As an approximate conversion, for natural gas, 1 mcf is roughly equivalent to 1 MMBtu.
How do you convert Mmscf to Mmbtu?
MMBTU is an acronym for "Million Metric British Thermal Units." The M's represent the Roman numeral for one thousand. One thousand thousands equal one million, thus MMBTU, not "Million Metric"
Is there a convenient conversion equivalencies chart for mmbtu-tcf-bcf-m3 as regards lng?
1 MMbtu (million British thermal units) is equivalent to approximately 0.02510 thousand cubic feet (Mcf) or 0.00002510 billion cubic feet (Bcf) of natural gas. 1 MMbtu is also roughly equivalent to 28.3 cubic meters (m³) of natural gas when considering LNG. It's essential to remember that conversion factors can vary slightly depending on the quality and composition of the gas being measured.
How much natural gas is required to produce a ton of urea?
Each ton of Urea will need 930 cubic meter of natural gas. It will require 230 cubic meter for conversion and nearly 700 cubic meter for input chemical. In MMBTU terms, it will require nearly 27 MMBTU. In calorific value, it will require 7 Giga calories.
How do you convert from MMBTu to SM3?
To convert from MMBtu (Million British thermal units) to SM3 (Standard cubic meters), you need to know the heating value of the gas in question. Once you have the heating value, you can use it to convert MMBtu to MMSCF (Million Standard Cubic Feet) and then convert MMSCF to SM3 based on the standard conversion factor of 1 MMSCF = 28.32 SM3.
How to convert Therms to MMBtu?
I was just researching this same question today. Here's what I found hope it helps. 1 Therm = 100,000 BTU 10 Therms = 1MMBTU ( Million BTU's ) Therefore to convert from MMBTU to Therms, multiply the MMBTU figure by 10 to get Therms. Note: Therm to BTU conversion is based on the amount of energy obtained from burning 1 Therm (100 cubic feet of natural gas). This value is not exact, but close, and could be different from one natural gas field to another.
Natural gas Cubic feet to BTu?
102,000 BTU = 1 ccf
How many cubic feet of natural gas are there in a therm?
100 cubic feet equals 1 therm
How many liters are in 1000 cubic feet?
There are approximately 28,316.8 liters in 1000 cubic feet.
What does ccf mean when applied to natural gas measurements?
CCF stands for 100 cubic feet. It is a unit of measurement used for natural gas consumption. One CCF is equal to 100 cubic feet of natural gas.
What is 1 MCF?
1 MCF (thousand cubic feet) is a unit of measurement commonly used in the oil and gas industry to quantify natural gas volume. It is equivalent to 1,000 cubic feet of natural gas.
What is Ccf in natural gas?
Ccf stands for centum cubic feet and is a unit commonly used to measure natural gas volume. It is equivalent to 100 cubic feet of natural gas.
