answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How many amps is 95 mm al 4 core good for at 300 m run?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How many amps is 250 MCM wire good for?

300 Amps if used for service entrance conductors. Table 310.15


How many amps in an aed shock?

Up to 300


How many amps does 300 watt floodlight draw?

To calculate the amperage drawn by a 300 watt floodlight, you can use the formula: Amps = Watts / Volts. Assuming a standard voltage of 120V for residential lighting, the floodlight would draw approximately 2.5 amps (300W / 120V = 2.5A).


How many amps does a 3000w inverter 240 v draw from a 12 volt system?

It would be at least 250 amps, maybe 300 amps.


How many Amp does 300 watts generate?

It generates 25 Amps.


How many amps are in a lightningbolt?

An average bolt of positive lightning carries an electric current of 300 kA = 300,000 Amps.


HoW many amp is 300 watts?

As asked, the question cannot be answered. At 1 volt, 300 Watts = 300 Amps. At 10 volts, 300 Watts = 30 Amps. At 100 volts, 300 Watts = 3 Amps. At 120 volts, 300 Watts = 2.5 Amps. At 240 volts, 300 Watts = 1.25 Amps. To calculate the relationship between Amps, Volts and Watts, use the formula: Watts = Amps * volts


How many degrees is it in earths mantle core?

120-300


How good are the behringer 300 watt bass amps?

Try them out yourself and make your own judgement. What might be good for someone might be awful for someone else.


How many amps in a 300watt bulb?

There are zero amps in a 300 watt bulb. Watts are the product of amps times volts. W = A x V. To find amperage use the equation A = W/V. If you find the voltage of the 300 watt bulb uses, divide the wattage by the voltage and it will give you the amps of a 300 watt bulb.


How much wattage is a 300 ampere welds?

There are zero watts in 300 amps. Watts are the product of amps times volts.


A electric component takes 5 amps to run at 12 volts Will 300 miliamps make it run?

No, 300 milliamps is insufficient to make the component run, as it requires 5 amps. 300 milliamps is equivalent to 0.3 amps, which is significantly lower than the required amperage for the component to operate.