answersLogoWhite

0

What else can I help you with?

Continue Learning about Math & Arithmetic

How many 5 cubic bags of sand do you need to make 2 yards?

You need10.8/(the number of cubic feet of sand in each bag) bags.


How many bags of sand will you need for a ton?

The number of bags of sand needed for a ton depends on the weight of each bag. Standard bags of sand typically weigh 50 pounds. Since there are 2,000 pounds in a ton, you would need 40 bags of 50-pound sand to equal one ton.


How many bag of cement and sand per square meter at 5 inches thick concrete slab?

Well, darling, if you want a concrete slab that's 5 inches thick, you'll need about 0.012 cubic meters of cement and 0.06 cubic meters of sand per square meter. Just make sure you mix it well and pour it like a boss. Good luck with your project, sugar!


What is the number of bags of cement required in 1 cubic meter if 1 bag cement is to 4 bag gravel is to 6 bags sand mixture of concrete?

To properly answer this question, one would need to know the volume of a "bag", since "bag" isn't any standard of volume or weight. Typical Portland Cement has a density to 1505kg / cubic meter. In addition, one would also need to know the coarseness of the gravel, as the ability of the sand and cement to fill in the aggregate depends heavily on the average size of the gravel pieces.


How many 50 lb bags of sand are needed for 10x12 yard at 2 inches deep?

To convert the weight of the sand into a volume and find out how much you need you would need to know the density of the sand as the more dense it is the less sand there will be in a 50lb bag and the more bags you would then need to fill the yard

Related Questions

How do you calculate sand and cement for screed?

How many bags of cement am I going to need, for a screed floor finish in 5.4m³?


How many bags of cement and sand do need for wall plastering?

100


How many 20 kg bags of cement will you need to mix with 13 cubic meters of sand if you want to mix at a ratio of 8 sand to 1 cement?

If a 20kg bag of cement=0.1m3 with 100 lots o 0.01 to 1m3 then you will need 12.5 bags per m3. So you need approx 11.5m3 of sand and 144 bags of cement (144 x 0.01 = 1.44m3) to give you a total of 12.94m3


I want to lay a car port foundation 20' X 12' X 2 inches how many bags of Sand and Cement do I need?

Need to know how many bags of cement I will need for a 20x10 space?


How many bags of cement sand and stone goes into 1cubic yard of concrete?

10


How many bags of sand in 1 cubic meter?

The density of sand can vary, but a common value is around 1,600 kg/m^3. Assuming this density, 1 cubic meter of sand would weigh 1,600 kg. If a bag of sand typically weighs around 20 kg, you would need 80 bags of sand to fill 1 cubic meter.


How many bags of cement and sand required for 4500 bricks of 3 x 9?

7 bags per 1000 on mortar mix and half a truckload of "mortar" sand aught to do it.


How many cement bags in M20 concrete?

in india, for m-20 cement concrete, for 1 cu.m.- 3.47 quntl cement-0.45 cu.m. sand( fine aggr.)- and 0.90 cu.m. chips( course aggr.), that means 6.94 or 7 of 50 kgs.cement bags so for M-25, for 1 cu.m. 4.03 qntls cement- 0.45 sand- 0.90 cu.m. chips, so 8.06 cement bags


How many sand bags do you need to make a foxhole?

19.5


How many 5 cubic bags of sand do you need to make 2 yards?

You need10.8/(the number of cubic feet of sand in each bag) bags.


How much sand gravel and cement will you need?

1 cement 2 sand 3 gravel


How many bags of sand will you need for a ton?

The number of bags of sand needed for a ton depends on the weight of each bag. Standard bags of sand typically weigh 50 pounds. Since there are 2,000 pounds in a ton, you would need 40 bags of 50-pound sand to equal one ton.