0
How many cubic feet of capacity does a washer have if the radius of the tub is 10 inches and the height is 14 inches?
To calculate the capacity (volume) of the tub, you multiply the area by the height. Area is pi x r-squared = 3.1416 x 10-squared = 3.1416 x 100 = 314.16. Volume = 314.16 x 14 = 4398.24 cubic inches. There are 1728 cubic inches per cubic foot, so you divide 4398.24 by 1728 = 2.5452777 cubic feet.
What else can I help you with?
How do you calculate the volume of a washer?
The formula for the volume of a cylinder is pi times the radius squared times the height. Pir^2h
What are the inequalities describing the flat surface of a washer that is one and a half inches in diameter with an inner hole of diameter three fourths inches?
Given the information in the question, there is no need for any inequality. the flat surface can be described as an equality. Outer diameter = one and a half inches => outer radius = 0.75 inches. Inner diameter = three fourths inches => inner radius = 0.375 inches. Area = pi*(0.752 - 0.3752) square inches. So one possible set of inequalities is 0 < area < 1,000,000,000 sq inches!
What is the capacity of Maytag model LAT9706AAE?
2.96 cubic ft
What is cubic foot of Amana Washer model NFW7500VW?
That's a front-load washer with a capacity of 4.1 cubic feet.
What is cubic foot capacity of Kenmore 80 series model 110 23832100 - Washer?
2.8
What is the capacity of a Maytag LA182 washer?
2.2 cubic feet (effective radius allowing for agitator = 10 inches, depth 12 inches). I measured it today.
What is the recommended height for a washer standpipe?
The recommended height for a washer standpipe is typically around 18-30 inches above the trap.
What is the standard height for a washer box?
The standard height for a washer box is typically around 42 inches from the floor to the center of the box.
What is the recommended height for a washer outlet box?
The recommended height for a washer outlet box is typically around 42 inches from the floor.
What is the capacity of your maytag washer a884?
If you do not have your manual, you can calculate your washer capacity by following this equation.Ê Measure the radius of the tub; from the center of tub to the outside wall of the tub. Alternatively, measure the diameter and divide by 2. This is the radius.Ê Multiply the radius by the radius; note this is not the same as multiplying the radius by two. This is equivalent to the radius squared. Multiply the value from step 4 by the depth of the tub to find the cubic feet capacity of the washer. Multiply the radius squared from step 3 above by pi (3.14).
What is cubic foot capacity of Kenmore Elite washer model 110.20972991?
Since I'm buying a washer and dryer I had to calculate this myself ... The cubic feet of the Kenmore washer model 110 heavy duty is 2.8 cubic feet. Measured to the top water line 14.5 inches and using the radius of the tub of 10.375 inches.
What is the standard height of a washer box in a laundry room?
The standard height of a washer box in a laundry room is typically around 42 inches from the floor to the center of the box.
What is the standard washer box height for installation in a laundry room?
The standard height for installing a washer box in a laundry room is typically around 42 inches from the floor.
What is the recommended vent height for a stackable washer and dryer?
The recommended vent height for a stackable washer and dryer is typically around 12-18 inches above the floor.
What is the recommended height for a washer p trap installation?
The recommended height for a washer p trap installation is typically between 6 to 18 inches above the floor level.
What capacity is Kenmore 110 82980120 washing machine?
George Ruboyianes wrote: Spec is not published anywhere because they did not start rating them that way until the front loaders cam out. However the drum is simply a cylinder and the volume of a cylinder is easy to figure out. Volume equals pie times radius squared times height. Don't panic I will do the math for you. Pie is 3.14. The radius as measured on my 82980120 washer is 10.5 (0.88feet) inches from edge of drum to center of agitator. Height is from the floor of the drum to the water line on the high setting, which is 14.75 inches (1.23 feet). So 3.14 X (0.88feet) squared times (1.23 feet) equals 2.99 cubic feet capacity. So it is roughly a three cubic foot washer.
What is the recommended washer drain height for proper installation and functionality?
The recommended washer drain height for proper installation and functionality is typically around 30 inches above the floor level.
