If the container is 3ft x 3ft x 9ft, the answer is 81 cubic ft.
There are approximately 607.5 gallons of water.
The internal cubic meter (CBM) of a 20-foot container is approximately 28.3 cubic meters. This measurement is derived from the standard dimensions of the container, which typically measures about 6.058 meters in length, 2.438 meters in width, and 2.591 meters in height. The internal volume can vary slightly based on the container's specific design and construction.
Cubic foot
A cubic container has a volume of 1cm^3 and can hold 1 ml of water which has a mass of 1.AnswerMass is measured in kilograms. The mass of a given cubic container depends on the material contained within.
The volume of a standard container van, such as a 20-foot or 40-foot shipping container, can be calculated by multiplying its internal dimensions. A 20-foot container typically has a volume of about 33 cubic meters (1,172 cubic feet), while a 40-foot container has a volume of approximately 67 cubic meters (2,372 cubic feet). These values can vary slightly based on specific container models and manufacturers.
The number of banana boxes that can fit in a 40 cubic foot container depends on the size of the boxes. Typically, a standard banana box measures about 1.5 cubic feet. Therefore, you could fit approximately 26 to 28 banana boxes in a 40 cu ft container, assuming optimal packing and no wasted space.
They measure different things. A foot is a linear measure, it measures distance or the length of something. A cubic foot (or any cubic measurement) measures the volume or capacity of a container. How much the 'stuff' the container can hold.
It is 5.92 inches.
The internal cubic meter (CBM) of a 20-foot container is approximately 28.3 cubic meters. This measurement is derived from the standard dimensions of the container, which typically measures about 6.058 meters in length, 2.438 meters in width, and 2.591 meters in height. The internal volume can vary slightly based on the container's specific design and construction.
There's not enough information to answer this question. Please revise.
Cubic foot
For General.A (gallon) is a fluid measurement, and a (cubic foot) is a volume measurement. So to measure a gallon, you need to measure the square in. of container (use container that measures the same square in. from bottom to top), then pore in one gallon of any liquid and measure the hight it comes; multiply this by square in. of container and you have your cubic inches in that gallon. For Water.One gallon equals 0.134 cubic feet. This is granted that the water remain at constant temp., and at a point to have the stated volume.
135mL equates to 135 cubic centimeters (cc) or0.135 cubic decimeters.
The volume of the container is 5 cubic meters.
Assuming the container is full at 1500 liters, the container's volume in cubic feet will be about 53 cubic feet (52.9720005, more precisely).
You don't. Metre measures length, cubic metre measures volume.
by a ruler
216 cubic metres