answersLogoWhite

0


Best Answer

Area of each board = 8*0.145 = 1.16 metres2.

Area to be covered = 7*7 = 49 metres2.

Number of boards required = Roundup(49/1.16) = Roundup(42.2) = 43.

This assumes that all offcuts are used. That may not be possible if any of the offcuts are shorter than the distance between the supporting joists.

User Avatar

Wiki User

10y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How many decking boards at lenght 4.8 meters x 145 mm will I need to cover 7x7 meters?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

If the deck is 5.4 meters by 4 meters how much decking lineal meters do you need?

To calculate the total decking lineal meters needed, you first need to determine the perimeter of the deck. The perimeter is calculated by adding all four sides of the deck together: (5.4 + 5.4 + 4 + 4) = 18.8 meters. Therefore, you will need 18.8 lineal meters of decking for your 5.4m by 4m deck.


How many 1X6x12' deck boards to cover 800 sq ft?

How many 1x6x12 deck boards to cover 800 sq.ft


What is cedar decking used for?

Cedar is a popular type of tree, commonly used in flooring, and sometimes furniture. Cedar decking is used to cover ground that is exposed to the weather, as it offers a great look, and is resistant to weathering.


When a board is 1 x 8 and its how many boards do I use to cover 640 square feet?

80 boards.


If a single roll of wallpaper will cover 3 square metershow many single roll will take to cover a wall 2 meters x 5 meters?

If a single roll of wallpaper will cover three square meters it will take 3.1 rolls to cover a wall that is 2 meters x 5 meters. You will need 10 square meters of paper to cover this size wall.


I have an above ground pool with a deck attached on one side and aluminum decking all around.The pool size alone is 15x24 oval. What size pool cover should I buy to cover all decking?

Add the height of the pool to the 15' width of the pool. Then add the width of the deck to the 24' length of the pool to obtain the right measurement.


What area would 860 meters cover in square meters?

You can't convert meters to square meters.


How do you cover an odd shaped pool?

Depending on your covering needs there are basically two options. 1) Safety Cover needed? The only way to cover a pool this way is to have a custom Safety Cover made. It requires A/B measurements and is anchored with brass anchors in decking or lawn tubes in other types of decking. 2) Winter cover to keep leaves and debris out of pool? You'll need to find a rectangle cover that is large enough to cover the pool. Use water tubes to fully encircle the perimeter of the pool to ensure that wind doesn't get under the cover. Roll or fold up the excess cover and weigh it down with the water tubes.


How many 2x6x16 boards will you need to cover 400 square feet of deck?

The boards are 2"x6"x 16 ft. Since each board is 0.5 ft wide and 16 ft long, it will cover 8 sq ft. 400/8 = 50, so you will need 50 boards.


How many 7 foot long 4 foot wide boards are need to cover 192 sq. feet?

7*4 =28 square foot boards 192/28 = 6.857142857142857 = 7 boards


How many lineal meters will cover 30 square meters?

As a linear meter is a length with zero width, even with an infinite number of them they will not cover an area of 30 square meters.


How many 1x8x8 boards are needed to cover a 12 ftx 8ft porch?

18