To find the volume of a block measuring 108 inches by 12 inches by 8 inches, first convert the dimensions to feet. There are 12 inches in a foot, so the dimensions in feet are 9 feet (108 inches ÷ 12), 1 foot (12 inches ÷ 12), and ( \frac{2}{3} ) feet (8 inches ÷ 12). Therefore, the volume of the block in cubic feet is ( 9 \times 1 \times \frac{2}{3} = 6 ) cubic feet.
12inch x 12inch is 1ft x 1 ft=1 square foot You need 100 patio stones
120
A block is not a standard measure.
It is necessary to know the area of the kitchen An area is measured in square feet and no such information is provided in the question.
To cover a 10 feet by 10 feet area, you need to first convert the dimensions to inches. A 10 feet by 10 feet area is 120 inches by 120 inches, totaling 14,400 square inches. Each 12-inch by 12-inch paver covers 144 square inches. Dividing 14,400 square inches by 144 square inches per paver gives you 100 pavers needed to cover the area.
12inch x 12inch is 1ft x 1 ft=1 square foot You need 100 patio stones
120
A block is not a standard measure.
192
It is necessary to know the area of the kitchen An area is measured in square feet and no such information is provided in the question.
you probably might need 126 tiles for that
Approximately 648 bricks will be required. You have to revise that up a little bit for wastage.
85 pieces (12 in x 12 in) 1.) You have to have a common unit of measure. Make it square feet. 2.) 12 inch x 12 inch = 1 foot x 1 foot = 1 ft2 3.) Area of the room is 17 feet x 5 feet = 85 ft2
12 4 on each "floor" 3 floors total
how many feet is city block I st. pete, fl
A street block is not a standard measure.
The number of blocks in 300 feet depends on the length of each block. In many urban areas, a typical city block is about 1/8 of a mile, which is approximately 660 feet. Therefore, 300 feet would be roughly half a block, or about 0.45 of a block. However, block sizes can vary significantly depending on the location.