56 posts are needed for the fence
It depends on what kind of fence you wish to put up. For example, an electrified barbed wire and steel post fence would only require about three posts. But a wood plank and wood post fence would require about five or six.
6600 the correct answer is actually 6601 because you need one more post to close the fence.
You need 1962.5 fence posts.
Specifying the area inside the fence doesn't tell you the shape or the distancearound it (the "perimeter"). Here are the shortest possibilities. It could beanything longer than these.-- The shortest possible perimeter, requiring the least fence, is to enclosethe area inside a circle. For 11 acres, the diameter of the circle has to be781 feet, and the distance around it is 2,453.8 feet ... that's 246 fenceposts, not including whatever you do for a gate.-- If the sides of the lot are straight, then the shortest possible perimeteris a square. For 11 acres, each side of the square has to be 692.2 feet, andthe distance around it is 2,768.8 feet ... that's 277 fence posts plus the gate.If the lot is rectangular and not square, then the longer and skinnier it is,the more fence it'll need, with no limit. For example, the lot could be 33-ftwide and 14,520-ft long. That's 11 acres inside, and 29,106-ft around ...2,911 fence posts plus the gate.
That would depend on how far apart you want them.
56 posts are needed for the fence
It depends on what kind of fence you wish to put up. For example, an electrified barbed wire and steel post fence would only require about three posts. But a wood plank and wood post fence would require about five or six.
6600 the correct answer is actually 6601 because you need one more post to close the fence.
The amount of force that is needed to bend a steel fence post depends with the steel post in question. The force that is required is therefore calculated based on the material in question.
80 acres is 880 x 440 feet. Depends on how many cattle and how rough they are on your post settings. Most people around here in Oklahoma put their t-posts roughly 16' apart. This will take 164 posts. A roll of barbed wire will usually run a quarter of a mile of fence. So on a typical 5 wire fence it will take 30 rolls of barbed wire.
15 tepost
5280 x 5=26,400/10=2640
1432 divided by 4 equals 358, which is the number of 4-foot sections of fence. Since the fence must be terminated on both ends, add one more post to terminate the last section. Thus, the answer is 359 posts.
You need 1962.5 fence posts.
2
to answer that ? is the post is to the inside of the fence