There's no way to answer that question until we also know something about
the shape and dimensions of the tank.
-- If it's a cylindrical tank, then we could do it with either the diameter of
the base or the height of the tank.
-- If it's a sphere, then we could do it with the diameter alone.
-- If it's a rectangular tank, then we would need any two of its dimensions,
or the area of the real estate that it sits on, or the area of any other single
flat side of it.
2
Need the length of the tank also to determine the amount of oil
You will use about 9.2 gallons of fuel on the trip.
32 miles per 4 gallons = 32/4 miles per 4/4 gallons = 8 miles per 1 gallon = 8/2 miles per 1/2 gallon = 4 miles per 1/2 gallon
You will need 1.107 gallons of fuel.
2
Assuming fuel consumption is consistent, if the cruise ship moves 6 inches and burns 1 gallon of fuel, it would burn 1 gallon every 6 inches. In 100 miles, there are 6,336,000 inches. Therefore, in 100 miles, the cruise ship would burn approximately 1,056,000 gallons of fuel.
About 1/8th of a gallon. Motor oil weighs a bit less than 8 pounds to the gallon.
That depends on the shape and orientation of the tank.
There is no direct conversion between inches and gallons because one is a unit of length and the other is a unit of volume. However, if you are looking to convert fuel efficiency from miles per gallon (mpg) to inches per gallon (in/gal), you would need additional information such as the diameter of the fuel line or nozzle.
None. An inch is a measure of length or distance in 1-dimensional space while a gallon is a measure of volume in 3-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
miles ÷ (miles/gallon) * ($/gallon) = miles * (gallons/mile) * ($/gallon) = (miles * gallons * $) / (miles * gallons) = $ So divide 560 mi by the vehicle's fuel economy, then multiply the quotient by the fuel cost.
Need the length of the tank also to determine the amount of oil
To convert pounds to gallons for diesel fuel, you need to know the density. On average, 1 gallon of diesel fuel weighs about 7 pounds. Therefore, 207,538 pounds of diesel fuel would be approximately 29,648 gallons (207,538 pounds / 7 pounds per gallon).
20 gallons
1.4
The density of No. 2 diesel fuel is approximately 7.15 pounds per US gallon. So Here is a little math for you... take 2000lbs(1 ton) Divide by 7.15 and you will get your answer. approximately 279.70 gallons of No. 2 diesel Fuel is equal to 1 ton.