10 gallons = 40 quart s= 160 cups
1,770 gallons.
10 million gallons is equal to: 1,337,000 cubic feet.
2,360 gallons.
How many gallons of water a 10 min bath takes depends entirely on how much water is put in the bathtub.If 80 gallons are wasted in a 20 min bath, im guessing you waste 40 g in a 10 min bath
There need not be any water in the pipe.Assuming that it is a 10 inch diameter pipe, then its capacity is 4.08 US gallons.
I take it that there should be percentage signs in this question. How many gallons of pure water must be added to 10 gallons of 30% saltwater to make a solution that is 25% saltwater?" If 30% of the 10 gallons is saltwater that means that 3 gallons are saltwater. As only pure water will be added, we need to find out how many gallons = 100% if 3 gallons = 25%. The relationship of 100 to 25 is 4 : 1, so there will need to be a total of (3 x 4) gallons at the end of the operation. As 3 x 4 = 12, and as we started with 10 gallons, that means that we need to add 2 gallons of pure water.
10 gallons of water is 83.5 pounds
10 US gallons is approximately 83.5 pounds
There need not be any water at all in the pipe. The capacity of the pipe is approx 3.4 Imperial gallons.
10,000 Imperial gallons: 45,460.9 litres 10,000 US gallons: 37,854.12 litres
10 gallons = 40 quart s= 160 cups
1.6 gallons of water.
Up to 1,795.2 gallons of water.
6.5 US gallons of water.
I think it might be a 3:1 ratio like water to rice but cornstarch so actually 30 gallons to 10 gallons of water
40.8 gallons of water per 10 feet of length.