0
To determine the number of host addresses available in the 128.107.0.0 network, we first need to identify its subnet mask. Assuming it's a Class B network with a default subnet mask of 255.255.0.0 (or /16), the number of usable host addresses can be calculated using the formula (2^{(32 - subnet_bits)} - 2). This results in (2^{(32 - 16)} - 2 = 65,534) usable host addresses, where we subtract 2 for the network and broadcast addresses.
What else can I help you with?
What are the first four addresses in the 192.168.1.64?
The first four addresses in the 192.168.1.64 subnet, assuming a typical subnet mask of 255.255.255.0 (or /24), are 192.168.1.1, 192.168.1.2, 192.168.1.3, and 192.168.1.4. These addresses are usable for devices within that subnet. The address 192.168.1.64 itself typically represents the network address for that subnet and is not a usable host address.
How many individual systems can be subnet with netmask 255.255.240.0?
A netmask of 255.255.240.0 corresponds to a /20 subnet, which provides 12 bits for host addresses (32 total bits minus 20 bits for the network). This allows for (2^{12} - 2 = 4096 - 2 = 4094) usable individual systems, accounting for the network and broadcast addresses that cannot be assigned to hosts.
What stage of the focus of counterinsurgency operations concerns itself with expansion of stability operations across contested regions ideally using host nation forces?
middle stage
What is difference between subnet-mask and wildcard mask?
Subnet Mask: Subnet mask is a 32 bits value which differentiate the host portion & network portion of an IP address. Where network portion is designate by the 1's & host portion 0's. Wild card Mask: Wild card mask defines which IP addresses are allowed & which are blocked. Where 0's defines the accurate match where non zero value defines any value on the corresponding octete.
What portion of ip ddress resembles 150.0.0.0?
The IP address 150.0.0.0 is part of the Class B range of IP addresses, which spans from 128.0.0.0 to 191.255.255.255. In this specific address, the first two octets (150.0) indicate the network portion, while the last two octets (0.0) represent the host portion. This means that it can accommodate a large number of hosts within the 150.0.0.0 network.
How many host bits are necessary to assign addresses to 62 hosts?
6
How are IP addresses assigned from a pool of IP addresses?
That means that the DHCP server keeps track of what IP addresses - out of a pool (or set) of addresses - have been assigned. Any time a host (computer or similar) requests an IP address, the DHCP server will assign an available address and mark it, in its memory, as "assigned" so it won't assign the same address to another computer.That means that the DHCP server keeps track of what IP addresses - out of a pool (or set) of addresses - have been assigned. Any time a host (computer or similar) requests an IP address, the DHCP server will assign an available address and mark it, in its memory, as "assigned" so it won't assign the same address to another computer.That means that the DHCP server keeps track of what IP addresses - out of a pool (or set) of addresses - have been assigned. Any time a host (computer or similar) requests an IP address, the DHCP server will assign an available address and mark it, in its memory, as "assigned" so it won't assign the same address to another computer.That means that the DHCP server keeps track of what IP addresses - out of a pool (or set) of addresses - have been assigned. Any time a host (computer or similar) requests an IP address, the DHCP server will assign an available address and mark it, in its memory, as "assigned" so it won't assign the same address to another computer.
What does most networks use to dynamically assign addresses and configure computers to use them?
dynamic host configuration protocol (DHCP) server
Which service allows you to assign IP addresses and other addressing info to hosts automatically?
DHCP (Dynamic host connectivity protocol)
Which IP address is reserved for Automatic private ip addressing?
I think you're thinking of the protocol used to automatically assign IP addresses? An IP address does not assign an IP address, and IP address is a node on a network where data can be sent or received. The protocol used for automatic assigning of IP addresses would be DHCP (Dynamic Host Configuration Protocol).
What application protocol dynamically allocates IP addresses to hosts?
DHCP - Automatically provides client computers and other TCP/IP-based network devices with IP addresses
How many host addresses can be assigned in each subnetwork when using network address 172.16.0.0 with subnet mask 255.255.252.0?
3
What service distributes IP addresses automatically?
DHCP (Dynamic Host Configuration Protocol). A network node can request an IP address from a DHCP server using a broadcast frame. The DHCP server may assign an IP address to the node as well as a subnet mask and default gateway.
How many network addresses are there in a network with a subnet mask of 21?
One - by your problem statement, all addresses are part of the same network. The number of host addresses is 232-21 - 2, or about 2000.One - by your problem statement, all addresses are part of the same network. The number of host addresses is 232-21 - 2, or about 2000.One - by your problem statement, all addresses are part of the same network. The number of host addresses is 232-21 - 2, or about 2000.One - by your problem statement, all addresses are part of the same network. The number of host addresses is 232-21 - 2, or about 2000.
How does DHCP allow devices to communicate?
They use DHCP to assign IP Addresses to Devices such as Windows XP, Networking flashcards, OIt DHCP and BootP services, and connecting routers. The definition for DHCP is Dynamic Host Configuration Protocol.
What identifies both the logical host and the logical network addresses?
The IP protocol identifies both the logical host as well as the logical network addresses...........
How do you configure one host name to two IP addresses?
Using what's commonly referred to as "round robin DNS" or "multiple A records".
