it is about 1 and 1/2 inches
Direct Conversion Formula 42 mm*
1 in
25.4 mm
=
1.653543307 in
42 millimeters=1.65354331 inches Direct Conversion Formula 42 mm* 1 in 25.4 mm = 1.653543307 in
To convert 42 millimeters (MM) to inches, you can use the conversion factor where 1 inch is equal to 25.4 millimeters. Therefore, 42 MM divided by 25.4 MM per inch equals approximately 1.65 inches.
42mm
To compare 42MM and 10CM, we need to convert both measurements to the same unit. Since 1CM is equal to 10MM, 10CM is equivalent to 100MM. Therefore, 42MM is indeed larger than 10CM.
42/10 = 4.2 mm/10
There are 1066.8 millimeters in 42 inches.
42 millimeters=1.65354331 inches Direct Conversion Formula 42 mm* 1 in 25.4 mm = 1.653543307 in
4.2
It is: 42mm = 4.2cm
To convert 42 millimeters (MM) to inches, you can use the conversion factor where 1 inch is equal to 25.4 millimeters. Therefore, 42 MM divided by 25.4 MM per inch equals approximately 1.65 inches.
42mm
To compare 42MM and 10CM, we need to convert both measurements to the same unit. Since 1CM is equal to 10MM, 10CM is equivalent to 100MM. Therefore, 42MM is indeed larger than 10CM.
The standard width of an electric guitar neck is typically around 1.65 inches (42mm) at the nut, where the neck meets the headstock.
1.65" Direct Conversion Formula42 mm* 1 in 25.4 mm = 1.653543307 in
42mm
42mm
42mm is a standard socket. If you mean "what SAE socket fits," none of them do. BTW, what are you trying to get off that's got a nut that big on it?