0
Add your answer:
Earn +20 pts
Am many 57mm in cm?
57 mm = 5.7 cm
How big is 57mm x 36mm?
2052 square millimetres.
What does 57mm diameter look like?
A 57mm diameter would be the distance across a circle, measured from one point on the circumference, passing through the center, to the opposite point on the circumference. In practical terms, it would be slightly less than the width of a standard credit card, which is about 85.60mm x 53.98mm. Visualizing it, a 57mm diameter circle would be slightly larger than a US half dollar coin, which has a diameter of 30.61mm.
The perimeter of a quadrilateral is 152mm the sides are 45mm 30mm 20mm what is the length of the 4th side?
57mm
How many 120 mm squares would you get out of an a4 sheet of paper?
Two! a4 is 297x210 mm you can only get one across with 90mm left and 2 high with 57mm left
Am many 57mm in cm?
57 mm = 5.7 cm
How many ml in 57mm?
Impossible to convert a length unit (mm) to a volume unit (ml).
How many centimeters are in 57mm?
10 mm = 1 cm so 57 mm = 5.7 cm.
What is 57MM to the nearest cm?
To the nearest centimetre - it's 6 !
How big is 57mm x 36mm?
2052 square millimetres.
Convert 57 inches to centimeter?
There are 2.54 centimeters in one inch. So take your measurement in inches and multiply it by 2.54 to change the unit to centimeters. In this case, the answer is 144.78 centimeters.
The perimeter of a quadrilateral is 152mm the sides are 45mm 30mm 20mm what is the length of the 4th side?
57mm
What does 57mm diameter look like?
A 57mm diameter would be the distance across a circle, measured from one point on the circumference, passing through the center, to the opposite point on the circumference. In practical terms, it would be slightly less than the width of a standard credit card, which is about 85.60mm x 53.98mm. Visualizing it, a 57mm diameter circle would be slightly larger than a US half dollar coin, which has a diameter of 30.61mm.
How many 120 mm squares would you get out of an a4 sheet of paper?
Two! a4 is 297x210 mm you can only get one across with 90mm left and 2 high with 57mm left
What is the circumference of a circle if the diameter is 57mm?
Well, honey, if the diameter of a circle is 57mm, then the radius is half of that, which is 28.5mm. The circumference of a circle is calculated using the formula C = 2πr, so plug in the radius and you get a circumference of about 179.11mm. So, there you have it, darlin', the circumference of that circle is approximately 179.11mm.
What is the twist rate of a Model 700 Classic in 7x57mm?
7 x 57mm - 1 in 9 1/4" . . . . . . . .Remington 700
How many half inches is it?
how many half inches is what.
