Want this question answered?
Be notified when an answer is posted
11 kg = 1 m3 = 1 L
1 m3 x 1000000 cm3/1 m3 x 2.75g/cm3 x 1 kg/1000g = 2750 kg
there are 1.0000 kg in 1 cubic meter I do not know why, but i searched that up on a unit converter. It depends what you are reffering to; for example 1 m3 meter of water =1,000 kg = 1 metric ton
m3 kg-1 s-2.
Das variiert je nach Zementmischung. In der Regel hat Zement eine Dichte von 900 - 1900 kg/m3. Für den Durchschnittswert von 1400 kg/m3 beträgt das Gewicht also 1.4 Tonnen.
1MMBTU=? m3
It all depends upon the density of the substance. For 1 Kg of Mercury, with a density of 13534 Kg/m3 it will occupy a volume of about 0.0000739 m3. For 1 Kg of Hydrogen with a density of 0.0899 kg/m3 it will occupy a volume of about 11.12 m3.
11 kg = 1 m3 = 1 L
volume = mass ÷ density. 1 tonne = 1000 kg The volume depends upon the density of the clay which will vary with how wet it is. Dry clay has a density of 1600 kg/m3 → volume = 1000 kg ÷ 1600 kg/m3 = 0.625 m3 Wet clay has a density of 1760 kg/m3 → volume = 1000 kg ÷ 1760 kg/m3 ≈ 0.568 m3 Which means the volume of 1 tonne of clay will be in the range of approx 0.568 m3 to 0.625 m3
1 g/m3 = 0.001 kg/m3 ⇒ 13.6 g/m3 = 0.0136 kg/m3
There are approximately 3.9 mmBTU in 1 kg of LNG (liquefied natural gas). This value can vary slightly depending on the specific composition of the LNG.
1 kg of Lng of that particular quality will have say ' X ' k.cal per kg of calorific value from the data of LNG producer. Then 1 Ton of LNG will have 1000X when converted to B.T.U it will be 3967 multiplied by 1000 X What "particular quality" is referred to above??? Generally speaking 1 tonne (1000Kg) of LNG is considered to have a caloric value of 48 MMBtu
1 m3 x 1000000 cm3/1 m3 x 2.75g/cm3 x 1 kg/1000g = 2750 kg
3000 mg water = 3g water = 0.003 kg water Water Density is ----> 1000 kg/m3 One litre is equal to 1/1,000 cubic metre 1000 kg/m3 * 1/1000 m3 = 1 kg in 1/1000 cubic meter Therefore if 1 kg is 1 liter, 0.003 kg is 0.003 liter. "0.003 liters"
The conversion factor for LNG from kilograms (kg) to standard cubic meters (SCM) can vary depending on the composition and temperature of the LNG. However, a commonly used approximation is 1 kg of LNG is approximately equal to 0.553 SCM at standard conditions (15°C and 1 atm). This factor may vary and it's important to check with specific gas properties for accurate conversions.
At 4°C pure water has a density of 1000 kg/1 m3. 1 litre = 1000 cm3 3 litre = 3000 cm3 = 0.003 m3 Mass = Density x Volume = 1000 kg/1 m3 x 0.003 m3 = 3 kg
The density of anhydrous ammonia is approximately 0.681 grams per cubic centimeter at standard conditions (0°C, 1 atm).