A millimetre is a unit of measurement of length. A diameter is not. The question, therefore, makes no sense.
Radius = 1/2 of the diameter = 328/2 = 164 millimeters
30.4mm
The diameter of a circle is twice the length of its radius. If the radius is 12 millimeters, the diameter would be 2 times 12 millimeters, which equals 24 millimeters.
The radius of a circle is half of its diameter. Since the diameter is 14 millimeters, the radius is 14 mm ÷ 2 = 7 millimeters. Therefore, the radius of the circle is 7 millimeters.
To convert millimeters to inches, you can use the conversion factor where 1 inch is equal to 25.4 millimeters. Therefore, to convert 38 mm to inches, you divide 38 by 25.4, which equals approximately 1.5 inches. So, a diameter of 38 mm is about 1.5 inches.
Neptune has a diameter of approximately 49,244 kilometers. To convert this measurement to millimeters, you multiply by 1,000, resulting in a diameter of about 49,244,000 millimeters.
Radius = 1/2 of the diameter = 328/2 = 164 millimeters
Raindrops can vary in size, but on average they are about 1 to 2 millimeters in diameter. Some larger raindrops may be 4 to 6 millimeters in diameter, while smaller raindrops can be less than 1 millimeter in diameter.
21.21 millimeters wide
To convert the diameter from millimeters to thousands, you can divide the diameter in millimeters by 1,000. In this case, 20 mm is equal to 0.02 thousands.
(1,000)/(diameter of one M in millimeters)
The average diameter of a toothpick is about 2 millimeters.
30.4mm
A .45 caliber bullet typically measures 11.43 millimeters in diameter.
The diameter of a circle is twice the length of its radius. If the radius is 12 millimeters, the diameter would be 2 times 12 millimeters, which equals 24 millimeters.
The radius of a circle is half of its diameter. Since the diameter is 14 millimeters, the radius is 14 mm ÷ 2 = 7 millimeters. Therefore, the radius of the circle is 7 millimeters.
There is nothing equal. If you mean 'What is the diameter of a US Cent', it is 1.9 cm.