0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
10 mil equals how many inches?
A mil is 1/1000 inch; therefore, 10 mils = 1/100 inch.
How many 16th are in one inch?
16. 1/16 x 16 = 1
How many 16ths are in 1 inch?
16.
What is thicker 64 mils or 49 mils?
64 mils are thicker. One mil equals 1/1000 inch, or 0.001 inches. 49 mils is 49/1000 = 0.049 inches. 64 mils is 64/1000 = 0.064 inches. Since 64 is larger than 49, an object 64 mils thick is thicker than an object 49 mils thick.
How many 1 16ths are within an inch?
16
How many mils in a inch?
Mil means 1/1000 of an inch.
1/4 inch =how many mils?
0.25
How many microns make 1 mil?
1 inch = 25.4 millimetres0.03937 inch = 1 millimetre0.00003937 inches = 1 micron0.03937 mils = 1 micron1 inch = 25.4 millimetres0.03937 inch = 1 millimetre0.00003937 inches = 1 micron0.03937 mils = 1 micron1 inch = 25.4 millimetres0.03937 inch = 1 millimetre0.00003937 inches = 1 micron0.03937 mils = 1 micron1 inch = 25.4 millimetres0.03937 inch = 1 millimetre0.00003937 inches = 1 micron0.03937 mils = 1 micron
How would you Convert mils to mm?
Mils = One thousandth of an inch. Refer below web page for further clarification. http://acronyms.thefreedictionary.com/One+Thousandth+of+An+Inch 1 inch = 25.4mm 1 mils = 1 inch / 1000 = 0.001 inch 0.001 inch = 0.001 × 25.4 mm = 0.0254 mm
10 mil equals how many inches?
A mil is 1/1000 inch; therefore, 10 mils = 1/100 inch.
How thick is 75 mil as a fraction?
- mils are a unit of measure - 1 mil is 1/1000 of an inch thick - 75 mils is 75/1000 of an inch, or .075 inch
90 mils is equivilant to what fraction of an inch?
In the United States, One Mil is understood to be one one thousandth of an inch, or 0.001 inches. Mils are frequently used in measuring plastic, film, and sheet materials in applications that do not use the metric system.90 mils is equal to 0.090 inches, or 90/1000ths of an inch, which reduces to 9/100ths of an inch.However, fractional parts of inches are normally measured in powers of two (for example, 1/4 inch, 1/8 inch, 1/16 inch, and so on). In this case, we cannot get an exact answer, but we can come acceptably close.If using thirty-seconds of an inch (1/32), you can get pretty close to 90 mils. 3/32 of an inch is equal to 0.09375 inches, or approximately 94 mils. For most applications, that's probably accurate enough.For better accuracy than that, you would need to measure in 256ths. 23/256ths of an inch is approximately 0.0898 inches, which is within one mil tolerance of 90 mils.
Is there an imperial unit before inches?
1 inch = 1000 mils
How thick is 18 gauge vinyl?
Roughly 15.6 mils or 15.6 thousandths of an inch. Roughly, 1 gauge = .86 mils.
How many 16Th's of an inch are in an inch?
1 inch = 25.4 mm 1 1/16 inch = 1 x 25.4 + 25.4/16 mm
How many 16th are in one inch?
16. 1/16 x 16 = 1
How many five sixteenths are there in an inch?
how many 5/16 in an inch... rephrased: how many 5/16 in 1? Multiply by the reciprocal and reduce. 1* 16/5 = 16/5 = 3 and 1/5 = 3.2
