0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is the acceptable value of grounding resistance for any application?
An acceptable resistance for a ground to ground plate system is 2 ohms with a maximum allowance to 5 ohms. If the measured resistance is above 5 ohms more grounding rods or plates have to be added to reduce the resistance down to the acceptable levels.
How do you use bentonite in electrical grounding?
Bentonite has an affinity for water. By packing Bentonite around the ground rod it increases the conductivity of the ground rod. Ground rods are not supposed to have a resistance above 5 ohms when compared to the utility's ground grid. Getting the ground rod into this resistance zone in bad soil conditions is aided by the use of Bentonite.
What do lighting rods do?
Lightning rods are metal rods placed on top of buildings to protect them from being struck by lightning. The rods provide a path of least resistance for the lightning to follow, directing the electrical current safely into the ground to prevent damage to the structure.
Does the ground wire on a 200 amp panel need to be looped through both ground rods?
No, the ground wire on a 200 amp panel does not need to be looped through both ground rods. The ground wire typically needs to be connected to the grounding electrode system, which may include ground rods, but it does not need to loop through them. It is important to follow local electrical codes and guidelines when installing grounding systems.
How do you reduce neutral and earth voltage up to 0 volts?
If you are reading a voltage it is the drop across the resistance to ground. To get rid of the voltage get the resistance lower. This can be accomplished by installing more ground rods to the grounding system. Utility companies usually like 3 ohms to ground or less.
How far apart do ground rods need to be?
Ground rods should be spaced at least 6 feet apart. If multiple ground rods are used, they should be installed at a distance from each other equal to at least twice the length of the longest ground rod. This spacing helps ensure effective grounding and minimizes ground resistance.
Why the water gets heated when current is passed through carbon rods in it?
The carbon rods have electrical resistance. Thisi causes them to heat when current is passed through them. The water gets heated by the carbon rods.
How many ground rods are required for a 200amp service in Indianapolis?
According to the NEC, if the ground rod supplements another grounding electrode such as a metal water pipe, you are required 1. If the ground rod or rods is your only grounding electrode, you are required at least 2, at least 6 feet apart. Check with your local jurisdiction for local requirements.
How many rods are there in 160 rods?
In 160 rods, there are 160 rods. This is a funny question.. ha ha ha. not.
How many ground rods needed for a temporary service at construction site?
The NEC makes no provision for using 1 ground rod even on a temporary service. According to the NEC you must use 2 ground rods. However in my area we are allowed by the local inspector to use just 1. Call your local inspector and see what he requires as he has the last word on this.
How many rods are in a furlong?
40 rods equals one furlong">">
How many rods are there in 2 rods?
Obviously 2.
