There are 16 squares with sides of a quarter inch in one square inch.
A 12 by 12 inch square is a square foot. Which means it would take 180 of them.
A 14-inch square board has an area of 196 square inches (14 inches x 14 inches). Three 3-inch by 3-inch squares cover 27 square inches (3 inches x 3 inches x 3 squares). Therefore, the area covered by white tiles is 196 - 27 = 169 square inches. Thus, there are 169 square inches of white tiles on the board.
Make each square 1 x 1
A bigger square!
One and one fourth.
A 12 by 12 inch square is a square foot. Which means it would take 180 of them.
Of course. Make a 4-sided figure with four right angles,two 1-inch sides, and two 3-inch sides.Most rectangles are not squares.
A 14-inch square board has an area of 196 square inches (14 inches x 14 inches). Three 3-inch by 3-inch squares cover 27 square inches (3 inches x 3 inches x 3 squares). Therefore, the area covered by white tiles is 196 - 27 = 169 square inches. Thus, there are 169 square inches of white tiles on the board.
Make each square 1 x 1
110 of them.
A square inch is a measure of area. The area could have any shape but for simplicity consider squares and rectangles where the area is given by the product of length and width, lxw. The length and the width are linear measurements. You can assign any values you want to the length and width and their product will be an area. A square with sides of 1 inch will have an area of one square inch. A rectangle whose length is 2 inches and width 1/2 inch will also have an area of one square inch.
A bigger square!
sdsdsdsd
Old one. Make a square out of four squares, then remove two adjacent inside toothpicks. This leaves a large square with a small square inside.
One and one fourth.
five. four smaller squares in a 2x2 formation, which then make up a larger square.
3