Divide 7921 square inches by 144.
The answer should be pretty close to 55 square feet.
89 square meters = ~958 square feet.
89
To convert feet to inches, multiply the number of feet by 12. For 89 feet, that would be 89 × 12 = 1,068 inches. The slope of 2 does not affect the conversion from feet to inches; it may pertain to the angle of an incline but does not change the total inches in the given length. Thus, there are 1,068 inches in 89 feet.
There are 12 inches in one foot. Therefore, 1.78 inches is equal to 1.78/12 = 0.1483 recurring (that is, 0.1483333..) or 89/600 feet.
89 cm = 35 in = 2.9 ft = 2'11"
89 square meters = ~958 square feet.
89
30 x 141/2 = 435 square feet on the floor, another 435 on the ceiling, and (89 x height of the room) square feet on the walls.
89 cm is 2' 11"
1898.67 Question was not 89 sq ft 89 ft is1068 inches divided by 9 in =118.66
There are: 89/12 = 7 feet and 5 inches or 7 and 1/3 feet or 7.417 feet in 89 inches. Here is the math: 12 inches = 1 foott 12*7=84 89-84=5 in Convert inches into feet: 84/12=7 Result: 7 ft 5 in.
A 16 inch by 8 inch paver is 128 square inches which is equal to .89 square feet. Since a square foot is 12 inches by 12 inches which when multiplied equals 144 square inches, so 128 divided by 144 = .88888... or .89. so 225 square feet divided by .89 square feet per paver = 252.8 pavers or 253. Depending on pattern and outline you should probably add up to 10% for waste if the area will require a lot of cuts. If it is a simple rectangle laid parallel to sides then add as little as 2%or less for waste and edge fill in. So maximum of 278 to minimum of 253.
7 feet 5 inches = 89 inches circumference = 89*pi inches
7 feet, 5 inches
There are 12 inches in one foot. Therefore, 1.78 inches is equal to 1.78/12 = 0.1483 recurring (that is, 0.1483333..) or 89/600 feet.
89 cm = 35 in = 2.9 ft = 2'11"
89 mm = 3.5 inches.