Best Answer

A bundle of Shingles will cover roughly 33 square feet.

A square of Shingles (3 Bundles) will cover 100 square feet.

Q: How many square feet will a bungle of shingles cover?

Write your answer...

Submit

Still have questions?

Continue Learning about Math & Arithmetic

A square of shingles covers 100 square feet. So, you need 1732/100=17.32 square of shingles. If you can only buy whole number squares of shingles, you will need 18 squares of shingles to cover 1732 square feet.

A square usually refers to shingles or siding and it's the amount that covers 100 square feet (or a 10' x 10' area).3 bundles of shingles cover a square1 bundle of shingles covers a 4' x 8' sheet of plywoodSiding has a certain number of "square" per box

Tiles that are two feet on a side cover 4 square feet. 378 of them cover 1512 square feet.

27 squares is equivalent to 2700 square feet. Measure square area by multiplying length by width of your entire roof. Add all the areas together for total square feet. Take the square feet and divide by 100 to get squares. 3 bundles of shingles to make one square with 5 inches of exposure on the shingles. For every 33 feet of ridge you will need one bundle of three tab shingles. Each bundle of shingles has 27 shingles so that is 81 single tabs at approximately 5 inches each, 405 inches of run or 33.75 linear feet. At current shingle prices near $21 per bundle that will cost you about $1700 just in shingles. #15 roll of felt is 4 squares at about $20 per roll. One box of coil nails will usually cover 18-20 squares. Any other calculations and you are on your own.

"Square feet" aren't things that are used to cover area."35 square feet" is an amount of area that you have to cover with something.

Related questions

1957 sq feet of shingles will cover 1957 sq feet lol? retard much?

One square of shingles covers an area equivalent to a 10 foot square, or 100 square feet.

A square of shingles covers 100 square feet. So, you need 1732/100=17.32 square of shingles. If you can only buy whole number squares of shingles, you will need 18 squares of shingles to cover 1732 square feet.

around 100

3 square feet

How many bundles of 3-Tab Shingles are needed to cover 80 square feet?

A 10 X 10 area or 100 square feet.

54

The word "square," when used in context with roofing (shingles) and exterior siding, means one-hundred square feet. So, a square of shingles is 100 square feet of shingles. A square of siding is 100 square feet of siding. One hundred square feet is ten feet by ten feet.

9 bundles assuming std. 3 bundle/sq. shingles

How much area would 15 bundles of shingles cover. Standard duty shingles use 3 bundles for every 100 square feet so 15 bundles would cover 500 square feet.

Roughly 33 square feet. Three bundles make a square ( 100 sq. ft. )