If the room is rectangular - the usual case - multiply the length times the width. If length and width are in meters, the area will be in square meters; if length and width are in feet, the area will be in square feet, etc.
~32.6
Using a metric tapemeasure,multiply the length of your rectangle by the width.
to calculate square feet its width X length 10x35 =350 or 20x17.5 =350
Square feet = length by width ONLY Cubic feet = length by width by height Square feet = 16 x 16 = 256 square feet Cubic feet = 16 x 16 x 16 = 4096 cubic feet
If the room is rectangular - the usual case - multiply the length times the width. If length and width are in meters, the area will be in square meters; if length and width are in feet, the area will be in square feet, etc.
2.51 square meters.
~32.6
You don't measure the length and width in square feet. Square feet is an area. You measure the length and width in feet, then multiply them to get the area in square feet.
Using a metric tapemeasure,multiply the length of your rectangle by the width.
One acre equals:0.0015625 square miles,4,840 square yards,43,560 square feet orabout 4,047 square metres (0.405 hectares)So, an acre is a unit of area. To know the length and width, the heometry sholud be known.For example it could be:a rectangle of length 1000 meters and width 4.047 meters, ora rectangle of length 500 meters and width 8.094 metersa square of length = width = 63.616 meters
Length in feet x width in feet = square feet.
Nothing in particular. These are not dimensionally equivalent. Length would have a unit such as meters or feet, while width x height would have units such as (square meters) or (square feet), so you cannot just add them.
Square meters cannot be determined with only one measurement. You need two dimensions (such as width and length) in order to multiply them and obtain your answer. As a start, 40 feet = 12.19 meters.
For a rectangle; area = (length) x (width). So Length = 4 units, and Width = 3 units.(4 units) x (3 units) = 12 units². If the unit is feet, you have square feet. If it is meters, you have square meters, etc.
Area is length times width. If the length and width are measured in feet, the area will be in square feet.
Square feet is a measure of area. To figure out how many square feet there are in a square or rectangle, you would simply multiply the width by the length.For example, if the width is 5ft and the length is 7 ft, then the area would be 5x7 = 35 square feet.