0
Still curious? Ask our experts.
Chat with our AI personalities
Rene
Steve
TaigaAdd your answer:
Earn +20 pts
How many squares of shingles on area of 1732square feet?
A square of shingles covers 100 square feet. So, you need 1732/100=17.32 square of shingles. If you can only buy whole number squares of shingles, you will need 18 squares of shingles to cover 1732 square feet.
How long is 80 squares when it comes to shingles?
80 squares is a measure of area, it doesn't apply to length.
How many squares of shingles is needed for 700 sq ft?
A square covers 100 sq. ft. so 7 squares plus 2 bundles for the starter course and the ridge cap.
What is 27 squares in roofing measurement?
27 squares is equivalent to 2700 square feet. Measure square area by multiplying length by width of your entire roof. Add all the areas together for total square feet. Take the square feet and divide by 100 to get squares. 3 bundles of shingles to make one square with 5 inches of exposure on the shingles. For every 33 feet of ridge you will need one bundle of three tab shingles. Each bundle of shingles has 27 shingles so that is 81 single tabs at approximately 5 inches each, 405 inches of run or 33.75 linear feet. At current shingle prices near $21 per bundle that will cost you about $1700 just in shingles. #15 roll of felt is 4 squares at about $20 per roll. One box of coil nails will usually cover 18-20 squares. Any other calculations and you are on your own.
How do you find the square footage of a roof?
To find the sq. ft of a roof you have to measure the length and the width and multiply those figures together. Then you divide that figure by 100 and it will tell you how many squares of shingles it will take to cover it.
