0
How many tiles 30 cm X 30 cm do you need to fill a 4 meter X 4 meter flat surface?
Wiki User
∙ 13y ago
4 m * 4 m = 400 cm * 400 cm = 160000 cm2
Each tile = 30 cm * cm = 900 cm2
So number of tiles required = 160000/900 = 177.77.. or 178 tiles.
However, this assumes that nearly all the offcuts are used. In real life, you should allow at least 10% for wastage. This is to allow for offcuts that are too small to be used and for tiles that break when cutting.
If you do not want some of the area to be tiled with fragments, you will need 14 tiles along each dimension (4 metres/30 cm, rounded UP) - making a total of 14*14 = 196 tiles.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What do the angle measure have to do with tessellations?
A tessellation is a tiling pattern that fills a flat surface. Where the tiles meet at the corners, the corner angles must add up up to 360° so there are no gaps.
How many flat surface does a cone have in 3Dshapes?
Its base is a flat surface
What is the term for a mirrow with a flat surface?
A mirror with a flat surface - planar
What is flat surface called?
A flat surface generally refers to a horizontal surface and is referred to as the plane.
What is a flat surface to put things on?
A flat surface is no more that a plain horizontal surface with no depth. For example the surface of a table top is a flat surface, that is the surface only, not the depth of the top or the rest of the table
Should bathroom scales be placed on hard floor or tiles?
Any flat surface will do.
Can you cover rough slate tiles with linoleum?
Linoleum must be on a firm flat surface. It is recommended that the tile be removed.
Do floor tiles have to be flat or can they be curved?
Floor tiles can be both flat and curved depending on the design and purpose of the tile. Flat tiles are more common and traditional for floors as they are easier to install and create a smooth surface. They are generally made of materials such as ceramic, porcelain, natural stone, or concrete and are available in a variety of shapes, sizes, colors, and finishes. However, some specialized floor tiles are designed with curves or undulations to provide better traction or visual interest. For example, some non-slip outdoor tiles are designed with a slightly curved surface to provide better grip and prevent slips and falls. Similarly, some mosaic tiles are designed with curved edges to create a more organic, natural look. visit our website-buytilesandmore Curved floor tiles may be more challenging to install, and they may require special cutting tools or techniques to fit them together properly. They may also be more expensive than flat tiles due to the added complexity of their design and manufacturing. In summary, while flat tiles are more common for floors, curved tiles can be used for specific purposes and designs. The choice of tile will depend on the specific needs and preferences of the space and its users.
Is the sphere has a flat surface?
It does not have a flat surface.
What do the angle measure have to do with tessellations?
A tessellation is a tiling pattern that fills a flat surface. Where the tiles meet at the corners, the corner angles must add up up to 360° so there are no gaps.
What is a flat surface that goes on and on in all directions called?
The flat surface that goes on and on in all directions has no boundaries. This flat surface is called infinite surface. Accordingly, the answer is that the flat surface that goes on and on in all directions is called an infinite surface.
Can you tile over wall tiles?
It is best to remove the wall tiles. You need a flat service and a lot of times old tile will not be perfectly flat. If you remove the tiles you will have a good base to tile on. If you don't want to remove the tiles you may be able to add a backer board on top of the old tile and then tile on that.
A flat surface that has no thickness?
A plane is a flat surface with no thickness
A flat level surface?
A flat, level surface is a plane.
What is the weight of 50X6 copper flat per meter?
The weight of 50x6 copper flat per meter can be calculated by first finding the volume of the flat bar (50mm width, 6mm thickness, and 1000mm length) in cubic millimeters, then multiplying it by the density of copper (8.96 g/cm3) to get the weight in grams per meter. Finally, convert the weight from grams to the desired unit, such as kilograms or pounds.
Why isn't gneiss used to make tiles?
Gneiss does not easily break into flat sheets, so it is ill-suited for making tiles.
What is a drawing of earth on a flat surface?
It is a drawing of the earth on a flat surface
